08-12-2019 10:50 AM
I'm running netbackup 8.0 on redhat
99% of the servers I back up are Linux Clients. But I have a single Windows box that I need to exclude some files from backups.
I think I should be doing this by going to Host Properties / Clients / Properties / Windows Client / Exclude Lists
But I don't have those options there - it looks like Netbackup believes this is a linux box?
The box is correctly identified as a Windows x64 box when I look at the client list in the Policy
Solved! Go to Solution.
08-26-2019 09:44 AM - edited 08-26-2019 02:27 PM
I do appreciate that y'all are still helping me with this.
I have reached out to the network team to see if they can help track this down. When I look in the properties of the client in the Host Properties\Clients section - it reports the IP of the server. I've checked DNS and Vsphere. In both cases that IP is assiated with the current Windows u1probob01v server.
I'm pretty familiar with NBU on linux, but not so much Windows. Where is the client configured on the windows box? I've looked at the Backup, Archive, and Restore utility - (couldn't find anything in there that says Linux) - is there some other client utility on the server that retains NBU information that might have bad information in it?
While I was typing the above - Net-ops has come back and said they don't see any issues that could be causing my problem. (so no IP issues) I'll see if I can dig deeper on the vmware side -
08-27-2019 02:02 AM
Try compare MAC addresses ?
On master and media, get the MAC of the client from :
arp -a
...and compare that to MAC address of the client in VMware ?
12-19-2019 08:47 AM
this remained a problem until I updated to NBU 8.2 (linux) - then the server showed up in the Host Properties/Clients as a Windows server