cancel
Showing results for 
Search instead for 
Did you mean: 

Fail to Transfer Information to BMR Server

goh_Boon
Level 3
Hi,

When I tried to configure BMR client. I encountered a problem as the Subject.

The BMR Server (Main + File) was installed on RedHat Linux 9. The BMR client was on Windows Server 2003 Enterprise Edition. The NBU 5.0GA Server was on Windows Server 2003 Enterprise Edition.

Under the BMR Save Configuration Wizard, it passed the processes such as "Load System Information", "Load Disk Information", "Load IP Information", and "Load Device Driver Information". When it came to "Transfer Information to BMR Server", it failed. I have verified that the network connectivity had no problem. I could ping to BMR Server by name from BMR client. I could also telnet to BMR Server using port 8362 from BMR client.

However, this problem did not occur when I tried to do the same configuration as abovementioned except that the BMR Server was run on VMWare (Redhat Linux 9 too). Running the BMR Server on VMWare, I had successfully restored the client.

I have no idea of why is it so. Your advice on this will be much appreciated. Thank you very much.

Best Regards,
Goh
2 REPLIES 2

Julio_Rivera
Not applicable
was there more then one network card/port in the client?
It may be going over the wrong path.

goh_Boon
Level 3
No, there is one network card with one port in the client. Thank You