Hi everyone,
I have the following problem, maybe someone could help. I have a Library/Robot with two drives. One is an Ultrium2 and the other an Ultrium3. As all my tapes are lto2 and I want to use only one big pool of tapes, I decided to configure under Netbackup the Ultrium3 drive as an Ultrium2, so Netbackup sees both drives as Ultrium2.
The problem is that if I want to use the tapes that are already in the library, when the Ultrium3 loads the tapes, that tapes gets frozen.
04/15/2008 14:36:43 - granted resource HP.ULTRIUM3-SCSI.000
04/15/2008 14:36:43 - granted resource computer-hcart2-robot-tld-0
04/15/2008 14:36:45 - mounting A00052
04/15/2008 14:37:03 - Error bptm (pid=8260) FREEZING media id A00052, Medium identifiers do not match
But if I put a new tape (same density lto2), the new Ultrium3 will write to it without problems.
So, the question is, can I use Ultrium3 drives as if were an Ultrium2? I know is not a wise option, but I wanted to do until I change the old Ultrium2 drive for another Ultrium3, and all the tapes to lto3.
Thanks!!!