11-18-2013 03:23 AM
**** Moved to new discussion from https://www-secure.symantec.com/connect/forums/postgresql-error ****
Now, Mark,
After the client installation, I ´ll need an extra help for taking backup this client.
My question is: With which way (method) I 'll take backup this client that is a PHYSICAL machine and not virtual like the others.
* Also, my client (VA) is Windows 2012 64bit, but in the netbackup is reaching until win2008 and no at win2012 (I do not know if there is a problem with that).
thx.
Solved! Go to Solution.
11-18-2013 03:44 AM
If it is physical then you should use a MS-Windows policy type and ALL_LOCAL_DRIVES as the selection list
Dont worry about the Windows 2008 part - that is just a reference and i dare say things will change in future versions of NetBackup to include 2012 as an option - you could pick any O/S at that point and it would work
Hope this helps
11-18-2013 03:44 AM
If it is physical then you should use a MS-Windows policy type and ALL_LOCAL_DRIVES as the selection list
Dont worry about the Windows 2008 part - that is just a reference and i dare say things will change in future versions of NetBackup to include 2012 as an option - you could pick any O/S at that point and it would work
Hope this helps
11-18-2013 04:36 AM
it seems to be ok, thank you Mark
11-18-2013 04:43 AM
no problem - dont forget to close the thread off if you are all sorted
11-18-2013 06:53 AM
While the backup is over normally, however I have the below message.
Any help?
thx.
11-18-2013 07:15 AM
I found it, It doesn´t need the prefix, thx. any way
11-18-2013 07:18 AM
Look in Activity Monitor - The Client name in your Policy seems to be shortname for the client - va.
You cannot look for backups for va.generali.gr if backups were done for 'va'.
Change the Source and Destination client to match the Client hostname that you have used in the Policy.
PS:
PLEASE - ONE question per forum discussion. New issues (such as restore problem) should be in a new forum discussion)
Mark has answered your initial question. Please click 'Mark as Solution' underneath Mark's post.