02-20-2014 03:35 AM
Hello Forum,
Installing Netbackup 7.6.0.1 on Solaris 11 (SunOS ABC 5.11 11.1 sun4v sparc sun4v). Fresh INSTALLATION
Getting following error related to PBX installation.
-------------------------
Saving server binaries for SOLARIS.
Running /usr/openv/netbackup/bin/install_bp
Copying Solaris10 Client Binaries
Installing PBX...
Please wait while installation is in progress...
ERROR: Could not install VRTSpbx package
Please see installation log for more details
Installation log located here: /var/tmp/installpbx-11210-022014165922.log
ERROR: Installing PBX was unsuccessful.
Aborting ...
ERROR: Detected a failure running cp_to_client Solaris Solaris10.
Rerun /usr/openv/netbackup/bin/install_bp when the problem
has been resolved.
NetBackup server installation complete.
File /usr/openv/tmp/install_trace.9939 contains a trace of this install.
That file can be deleted after you are sure the install was successful.
-------------------------------------------------------------------------------------------------------
WHETHER WE HAVE TO INSTALL PBX first then actual installation. From where can i download the PBX binarries.
Thanks in Advance
Solved! Go to Solution.
02-21-2014 11:03 PM
Hello Marianne,
i have uninstalled and re-installed it again and was able to do is successfully.
But i m not getting Solaris 11 client for the OS under Hardware and Operating System under policy->clients.
02-22-2014 09:01 AM
Same Client binaries is used for Solaris 10 and 11.
See OS compatibility List: http://www.symantec.com/docs/TECH76648 under
Client Selections for Backup Policies
All NBU 7.x versions show Client selection as Solaris 10.
02-20-2014 03:36 AM
Also wanted to check as seen in the error it is showing Solaris 10 whereas i m installing it on Solaris 11.
I have downloaded the binaries from the upgradenotification mail which has provided the link.
02-20-2014 04:35 AM
PBX will automatically get install/upgrad along with the Netbackup Client s/w installation..
to fix the above issue: Unintsall existing PBX and try again the Netbackup installation
below is the ref TN:
http://www.symantec.com/business/support/index?page=content&id=TECH166562
Remove PBX with the appropriate native command as follows:
(Note: Remember, you should not remove PBX if your server uses other
Symantec software products that require PBX to run.)
AIX installp -u VRTSpbx
HP-UX swremove VRTSpbx
Linux rpm -e VRTSpbx
Solaris pkgrm VRTSpbx
02-20-2014 04:54 AM
The cp_to_client error message is likely the issue. Seems to be solved in this Connect thread.
https://www-secure.symantec.com/connect/forums/cptoclient-not-found
ERROR: Detected a failure running cp_to_client Solaris Solaris10.
Alternative Symantec Technote:
http://www.symantec.com/docs/TECH163402
02-20-2014 05:46 AM
Hello,
could you attach the insall log to this post
/var/tmp/installpbx-11210-022014165922.log
02-20-2014 09:52 PM
Hello Nagalla,
Pls. find the log file contents.
---------------------------------
[02-20-14-16:59:22] Version of installer script installpbx is 1.5.4.0
[02-20-14-16:59:22] Verifying that script is being run by root
[02-20-14-16:59:22] User verified
[02-20-14-16:59:22] Machine details
SunOS SRDCB0200MED01 5.11 11.1 sun4v sparc sun4v
[02-20-14-16:59:22] Installation directory and list of files in it
/usr/openv/netbackup/client/Solaris/Solaris10
total 1057230
-r-xr-xr-x 1 root bin 69453375 Nov 14 05:52 JRE.tar.gz
-r-xr-xr-x 1 root bin 208324133 Nov 14 05:54 NB-Java.tar.gz
-r-xr-xr-x 1 root bin 29401600 Nov 14 02:33 PBX.tar
-r-xr-xr-x 1 root bin 9745963 Nov 14 02:33 PBX.tar.gz
-rw-r--r-- 1 1097 101 29400064 Jul 11 2013 VRTSpbx.pkg
-r-xr-xr-x 1 root bin 141081773 Nov 14 05:56 client_bin.tar.gz
-r-xr-xr-x 1 root bin 99913 Nov 14 02:32 client_config
-r-xr-xr-x 1 root bin 91904 Nov 14 02:32 cp_to_client
-r-xr-xr-x 1 root bin 22819 Nov 14 02:32 extract_java
lrwxrwxrwx 1 root bin 14 Feb 20 16:57 ftp_to_client -> install_client
-r-xr-xr-x 1 root bin 30901 Nov 14 02:32 install_client
-r-xr-xr-x 1 root bin 54866 Nov 14 02:33 installpbx
-r-xr-xr-x 1 root bin 13649114 Nov 14 02:33 nbcheck
-rw-r--r-- 1 root bin 644 Nov 14 01:29 nbj.conf
-r-xr-xr-x 1 root bin 38244027 Nov 14 02:33 pddeagent.tar.gz
-r-xr-xr-x 1 root bin 27675 Nov 14 02:33 pdinstall
lrwxrwxrwx 1 root bin 14 Feb 20 16:57 sftp_to_client -> install_client
lrwxrwxrwx 1 root bin 14 Feb 20 16:57 ssh_to_client -> install_client
-r-xr-xr-x 1 root bin 583728 Nov 14 02:35 tar
-r--r--r-- 1 root bin 28 Nov 14 02:32 version
[02-20-14-16:59:22] Checking for VRTSpbx
[02-20-14-16:59:22] pkginfo -q VRTSpbx.*
[02-20-14-16:59:22] VRTSpbx is not installed
[02-20-14-16:59:22] Preparing for package installation
[02-20-14-16:59:22] Checking whether required package tar ball is present...
[02-20-14-16:59:22] Required package tar ball PBX.tar.gz is present
[02-20-14-16:59:22] ********************************************************************************
[02-20-14-16:59:22] ***************************Present status of PBX installation*******************
[02-20-14-16:59:22] ********************************************************************************
[02-20-14-16:59:22] /opt/VRTSpbx/build_version is not present
[02-20-14-16:59:22] ********************************************************************************
[02-20-14-16:59:22] ps -ef | grep pbx
root 11246 11210 0 16:59:22 pts/1 0:00 grep pbx
root 11210 11199 0 16:59:22 pts/1 0:00 /bin/sh ./installpbx -f PBX.tar.gz
[02-20-14-16:59:22] ********************************************************************************
[02-20-14-16:59:22] /opt/VRTSpbx/bin/pbx_exchange or strings command is not present
[02-20-14-16:59:22] ********************************************************************************
[02-20-14-16:59:22] /etc/vx/VxICS/icsul.conf is not present
[02-20-14-16:59:22] ********************************************************************************
[02-20-14-16:59:22] /etc/vx/VxICS/VxPBX.cfg is not present
[02-20-14-16:59:22] ***********************End present status of PBX installation*******************
[02-20-14-16:59:22] ********************************************************************************
[02-20-14-16:59:22] Removing temporary directory
[02-20-14-16:59:22] rm -rf /var/tmp/VRTSpbx_11210
[02-20-14-16:59:22] Creating temporary directory
[02-20-14-16:59:22] mkdir -p /var/tmp/VRTSpbx_11210
[02-20-14-16:59:22] Copying PBX.tar.gz to /var/tmp/VRTSpbx_11210
[02-20-14-16:59:22] Extracting /var/tmp/VRTSpbx_11210/PBX.tar.gz into /var/tmp/VRTSpbx_11210
[02-20-14-16:59:24] Please wait while installation is in progress...
[02-20-14-16:59:24] Installing/Upgrading private branch exchange on Solaris
[02-20-14-16:59:24] Checking for the PBX process...
[02-20-14-16:59:24] PBX process is not running.
[02-20-14-16:59:24] pkgadd -a /var/tmp/VRTSpbx_11210/admin -d /var/tmp/VRTSpbx_11210/VRTSpbx.pkg VRTSpbx
Processing package instance <VRTSpbx> from </var/tmp/VRTSpbx_11210/VRTSpbx.pkg>
Symantec Private Branch Exchange(sparc) 1.5.4.0
## Executing checkinstall script.
Copyright (c) 2013 Symantec Corporation. All rights reserved. Symantec and the Symantec Logo are trademarks or registered trademarks of Symantec Corporation or its affiliates in the U.S. and other countries. Other names may be trademarks of their respective owners.
The Licensed Software and Documentation are deemed to be commercial computer software as defined in FAR 12.212 and subject to restricted rights as defined in FAR Section 52.227-19 "Commercial Computer Software - Restricted Rights" and DFARS 227.7202, "Rights in Commercial Computer Software or Commercial Computer Software Documentation", as applicable, and any successor regulations. Any use, modification, reproduction release, performance, display or disclosure of the Licensed Software and Documentation by the U.S. Government shall be solely in accordance with the terms of this Agreement.
/usr/sbin/sh: /var/tmp/VRTSpbx_11210/installzMaCcl/checkinstallCMaCcl: cannot open [Permission denied]
pkgadd: ERROR: checkinstall script did not complete successfully
Installation of <VRTSpbx> failed.
No changes were made to the system.
[02-20-14-16:59:25] ERROR: Could not install VRTSpbx package
[02-20-14-16:59:25] Removing temporary directory
[02-20-14-16:59:25] rm -rf /var/tmp/VRTSpbx_11210
[02-20-14-16:59:25] installpbx exiting with return code: 1
[02-20-14-16:59:25] Please see installation log for more details
[02-20-14-16:59:25] Installation log located here: /var/tmp/installpbx-11210-022014165922.log
--------------------------------------------
02-20-2014 09:57 PM
Hello Sri,
This is a new installation on Solaris 11 (SPARC) server.
02-20-2014 10:13 PM
/usr/sbin/sh: /var/tmp/VRTSpbx_11210/installzMaCcl/checkinstallCMaCcl: cannot open [Permission denied]
pkgadd: ERROR: checkinstall script did not complete successfully
OS issue... Check permissions in /var/tmp.
Ownership should be root and permissions should be 1755 at least.
You are installing as root, right?
Also check umask value for root - should be 022 by default.
02-21-2014 11:03 PM
Hello Marianne,
i have uninstalled and re-installed it again and was able to do is successfully.
But i m not getting Solaris 11 client for the OS under Hardware and Operating System under policy->clients.
02-21-2014 11:21 PM
go to /usr/openv/netbackup/client/Solaris
see what are the folders that you are finding..
if you are seeing the solaris10, copy the Soalris10 to Solaris11
cp Soalris10 Soalris11
or els you can create the soft link to solaris11
ln -s Solaris10 Solaris11
then refresh the GUI.. now you should be able to see that..
02-21-2014 11:43 PM
Hello Nagalla,
Hope by default that should come with 7.6.0.1 since solaris 11 is supported since 7.1 if i am not wrong.
02-22-2014 07:12 AM
that is depends on the files that you extract at the time of installation..
PS:- this discussion is defferent than your opening post.., please mark the Solution if your opening post has been resolved. and open the new discussion on this if you would like to.
02-22-2014 09:01 AM
Same Client binaries is used for Solaris 10 and 11.
See OS compatibility List: http://www.symantec.com/docs/TECH76648 under
Client Selections for Backup Policies
All NBU 7.x versions show Client selection as Solaris 10.