cancel
Showing results for 
Search instead for 
Did you mean: 

Installation of robotic device driver for HP-UX 11iV1

Romain_Adam
Level 2
Hi,

As I found in the documentation for HP-UX, the robotic device is configured with the passthru driver, so the ADIC robot in this case should be seen as schgr CLAIMED device. Actually with the atdd driver for the IBM LTO drives, my robotic device is configured as acdd CLAIMED device. Is this a supported driver for VERITAS Netbackup 5.1? I did not find this driver in any list. In the documentation the LTO drives are claimed with atdd driver but each time the robotic device is used with schgr.

Can anyone tell me if acdd might be supported?

Regards, Romain
1 REPLY 1

Scott_Zeiders
Level 2
We are running HPUX with a IBM 3584 library. We found the acdd drives does not work. We use schgr for the robot, and atdd for the drives.