03-15-2012 10:09 AM
Hello I'm trying to figure out the BMR product, I have Windows NB7.1 server with BMR license and I'd like to enable BMR to some Linux clients.
Can I do this without creating a boot server as I already have a boot server on the network for pxe / kickstart. I'd like to insert some kind of boot iso on the clients manually setup the network and get them to contact the BMR server without a pxe dhcp. Is this possible ?
Solved! Go to Solution.
03-16-2012 08:24 AM
I think your client is rh-linux and master is windows. You need to have RH linux boot server to prepare SRT in order to recover linux client.
bmr bs (os) = bmr client (os)
and
Also in general bmr bs(os version) >= bmr srt (os version) ~= bmr client (os version) // Refer bmr admin guide for os specific details.
Thanks.
Mandar
03-15-2012 01:52 PM
you can boot the client off cd/dvd instead of pxe boot
03-15-2012 01:58 PM
On UNIX and Linux systems, use the bmrsrtadm command to create a bootable
CD/DVD image that contains an SRT. After you create the CD/DVD image, you
must use CD/DVD writing software to burn the image onto a CD/DVD.
This process copies an existing SRT to the CD/DVD media; therefore, an SRT that
supports the client must exist.
(for more information refer to the
Symantec NetBackup™ Bare Metal Restore™ Administrator's Guide)
03-15-2012 11:05 PM
>> Can I do this without creating a boot server as I already have a boot server on the network for pxe / kickstart. I'd like to insert some kind of boot iso on the clients manually setup the network and get them to contact the BMR server without a pxe dhcp. Is this possible ?
[Mandar] One option as suggested above by WR is use NB-BMR media based restore.
But in case you intend to do NW based restore then you need to have NB-BMR boot server deployed. You can not use existing PXE-DHCP server setup.
For NB-BMR boot server, requirement is to setup DHCP server with a sample DHCPD.conf file (BMR admin guide as this format mentioned) and have tftp service enabled. Further configuration is taken care by BMR prepare to restore step to have DHCP entry enabled for only that particular client which needs to be restored. BMR automatically takes care of configuration allocation and deallocation.
Thanks.
Mandar
03-16-2012 07:35 AM
OK thanks, but my Master server and BMR server are on a Windows server. Will there be bmrsrtadm on the windows server ? tttool
03-16-2012 08:24 AM
I think your client is rh-linux and master is windows. You need to have RH linux boot server to prepare SRT in order to recover linux client.
bmr bs (os) = bmr client (os)
and
Also in general bmr bs(os version) >= bmr srt (os version) ~= bmr client (os version) // Refer bmr admin guide for os specific details.
Thanks.
Mandar
03-20-2012 02:16 AM
OK , to be clear can someone confirm.
I need/ have
Have : NB server 7.1 windows
Need: Linux BMR boot server to create the SRT and boot iso ? does this need to communicate with the NB 7.1 windows server ?
Have: Linux redhat clients
is it true that I cannot create a BMR boot iso from a windows server ?
Regards
Andy
03-20-2012 02:43 AM
>> is it true that I cannot create a BMR boot iso from a windows server ?
For linux client, srt has to be linux same version and it can not be created from windows server. It needs linux boot server. I have mentioned the rules above.
>> Need: Linux BMR boot server to create the SRT and boot iso ? does this need to communicate with the NB 7.1 windows server ?
Master can be any NB supported platform. Hence above is fine. You need to check rules while creating BMR boot server.
Thanks.
Mandar
05-17-2012 08:57 AM
1. For prepare SRT you need linux boot server, but this server is used only for preparing and NetBackup may not use it if you like to restore clients from ISO (without dhcp and bootp). Boot server may be installed on the same server as client. Boot server may be restored as original client and not requires additional boot server (hi is boot server for himself). Version of linux must be the same Red Hat = Red Hat, Suse = Suse.
2. Boot server communicates with master server only in time of creation SRT.
3. You cannot create SRT for linux on Windows.
4. Upgrade NetBackup to 7.5 cause hi started to support Red Hat 6.2 from this version.