Label em unidade de fita standalone

[Marco_Usiminas]

Bom dia.

Quero colocar o label das fitas referentes ao dia da semana:

Ex: SEGUND, TERCA, QUARTA, etc.

ate consigo colocar SEG000, colocando SEG no Media Prefix ID e deixando o AVR colocar a seguencia, mas queria colocar SEGUND.

Isso é possivel?

att.

Marco Aurelio

[Marianne]

Google Translate says the following:

I put the label of the tapes for the day of the week:

Ex: Monday, Tuesday, Wednesday, etc..

I can put up to SEG000, placing the SEC Media ID Prefix and leaving the AVR set any required, but wanted to put SECOND.

Is that possible?

*****************************************

Not sure if translation is correct, but let me try to answer....

With Standalone, it is best to manually label the tapes. You can specify up to 6 characters for the media id.

Insert media in tape drive and use bplabel command:

bplabel -m <ID> -d <density> -o -p <pool-name> -u 0

Also see this discussion:

https://www-secure.symantec.com/connect/forums/netbackup-70-standalone-drive

[Marco_Usiminas · Accepted solution]

1 - adicione pela console administrativa > media > new o nome da nova fita que voce deseja, ex: SEGUND

2 - coloque uma fita que não tenha sido utilizada ainda pelo netbackup no seu drive standalone, ou coloque uma fita livre no driver e faça um quick erase antes do passo 3.

3 - run > cmd   <install_path>\Veritas\\NetBackup\bin\admincmd\ directory

4 - bplabel -m SEGUND -d hcart -o -p NetBackup -u 0

Obs: o label deve ser colocado via comand line pelo comando bplabel (não utilizar a console administrativa)

[Marianne]

Portuguese to English translation

1 - add the administrative console> media> new name for the new tape that you want, e.g: SEGUND.

2 - put a tape that has not yet been used by netbackup on your standalone drive, or place a free tape on the driver and do a quick erase before step 3.

3 - Run> cmd <install_path> \ Veritas \ NetBackup \ bin \ admincmd \ directory

4 - bplabel -m SEGUND -d hcart -o -p NetBackup -u 0

 

Note: the label must be placed via the comand line command bplabel (do not use the administrative console)