02-21-2014 10:05 AM
Hi,
If I run a manual backup and because of the amount of data being backed up it overlaps into the scheduled backup what happens with this overlapping?
Thanks in advance.
Solved! Go to Solution.
02-21-2014 11:02 AM
NetBackup, by default, has limited 1 job per client and 1 job per policy. You can modify these values but you take the risk of high disk I/O, which is why they are set to 1.
If you have not modified these values then NetBackup will wait on that client/policy till its done before kicking off a new backup.
02-21-2014 11:02 AM
NetBackup, by default, has limited 1 job per client and 1 job per policy. You can modify these values but you take the risk of high disk I/O, which is why they are set to 1.
If you have not modified these values then NetBackup will wait on that client/policy till its done before kicking off a new backup.
02-21-2014 05:18 PM
SymTerry, what if I modifiy to a different number? Will it only cost higher I/O?
Thanks again.
02-22-2014 10:48 AM
02-23-2014 10:32 PM
This article explains how manual backups affect scheduled backups as far as Frequency based schedules are concerned:
NetBackup Frequency Based Scheduling