cancel
Showing results for 
Search instead for 
Did you mean: 

Master Server/ Media Server

belse
Level 5

Hi All,

Pls let me know the steps to rebuild  Master Server and Media Server If these break down?

Master Server hardware has some hardware failure.

Media server is Master server due so need to install media server in another system.

Also pls let me know what are the requirement to setup both again?

Environment

O/S:- Win2008 R2

Master: 7.0

Thanks,

Belse

1 ACCEPTED SOLUTION

Accepted Solutions

Marianne
Level 6
Partner    VIP    Accredited Certified

NBU Troubleshooting Guide  http://www.symantec.com/docs/TECH127065

See Chapter 7 - Disaster recovery.

And this TN: http://www.symantec.com/docs/HOWTO72776

You need to know the tape number containing the Hot Catalog backup and the location of the DR file.

If you can find the catalog tape (see your other post) you can rebuild the DR file as follows: 

http://www.symantec.com/docs/HOWTO33934

View solution in original post

2 REPLIES 2

Marianne
Level 6
Partner    VIP    Accredited Certified

NBU Troubleshooting Guide  http://www.symantec.com/docs/TECH127065

See Chapter 7 - Disaster recovery.

And this TN: http://www.symantec.com/docs/HOWTO72776

You need to know the tape number containing the Hot Catalog backup and the location of the DR file.

If you can find the catalog tape (see your other post) you can rebuild the DR file as follows: 

http://www.symantec.com/docs/HOWTO33934

watsons
Level 6

You need to take care of the system rebuild on your own, based on your OS rebuild guidelines.

As for Netbackup, if its database resided on one of your corrupted disk (causing system failure?), find out the exact date/time, then look for the last-known-good catalog backup as per Marianne's post.

Once rebuild is done, install Netbackup with the same version (& patch level, if any), then perform the catalog recovery from the catalog backup media.