08-20-2021 12:19 AM
Hi all,
I am trying to migrate Netbackup Master Server 9.1 to another platform using Netbackup Catalog Recovery
I assign a name and IP address to the new server, the same as on the old server
On the target server, Netbackup Catalog Recovery fails with the following error: ERR - Failed to recover NBDB on Server_Name (5)
How to Migrate the Netbackup Server 9.1. to another server?
Which remedy is better to use?
Previously, і used Netbackup Catalog Recovery to migrate the Netbackup 8 Master Server to another platform. Everything was OK
OS - Windows 2019
Andrii
08-20-2021 01:31 AM - edited 08-20-2021 01:32 AM
the old netbackup name was configured as FQDN or netbios?
The same question for the new netbackup
the netbackup names must be exactly the same
08-20-2021 01:36 AM
NEw server name and OLd Server name - Fully Qualified Domain Name
08-20-2021 01:54 AM
The Veritas troubleshooting guide as a hole section about catalog recovery :
https://www.veritas.com/content/support/en_US/doc/15179611-127304775-0/v15107410-127304775
Cross platform recovery is not supported. e.g Windows to Linux. From your post above I guess its a Windows to Windows migration but could you please confirm ?
08-20-2021 01:58 AM
Yes, Windows to Windows migration...
08-20-2021 12:34 PM
My colleagues helped in finding a solution. At step 1, you need to perform a recovery disaster. Should apply image_name_FULL.drpkg created by the procedure bakup catalog The disaster recovery package contains the following information:
■ NetBackup CA-signed certificates and private keys of the master server certificate and the NetBackup certificate authority (CA) certificate
■ Information about the hosts in the domain
■ Security settings
■ External CA-signed certificates External CA-signed certificates from Windows certificate store, if applicable
■ NetBackup configuration options that are specific to external CA-signed certificates
■ Key management service (KMS) configuration
At step 2, you should complete the procedure for restoring the bakup catalog. Should apply image_name_FULL.
08-20-2021 11:31 PM
good info, thanks
Are you sure about KMS database? KMS is not part of netbackup catalog by default.
Had you add the KMS_CONFIG_IN_CATALOG_BKUP value at the original netbackup server configuration?
08-26-2021 04:30 AM
Thanks for the hint.
I will take into account when transferring a productive master server.
Also, you need to take into account the peculiarities of running NetBackup anomaly detection management service: https://www.veritas.com/content/support/en_US/doc/103228346-147321331-0/v149907957-147321331