β11-15-2011 05:08 AM
Dear Expert,
We have connected 4 tape drives to two server via SAN. They are going to be configured in SSO. The OS is Windows 2008 R2. Both servers have multipath IO enabled in Windows Features and device manager sees only 4 drives. Though when I try to configure the devices in NBU device configuration wizard I see dual paths for each drives in each server. I can see the same when I run scan command on each server.
************************************************************
*********************** SDT_TAPE ************************
*********************** SDT_CHANGER ************************
************************************************************
------------------------------------------------------------
Device Name : "Tape2"
Passthru Name: "Tape2"
Volume Header: ""
Port: 6; Bus: 0; Target: 0; LUN: 1
Inquiry : "HP Ultrium 3-SCSI R210"
Vendor ID : "HP "
Product ID : "Ultrium 3-SCSI "
Product Rev: "R210"
Serial Number: "6aA5s4n41e"
WWN : ""
WWN Id Type : 0
Device Identifier: "HP Ultrium 3-SCSI 6aA5s4n41e"
Device Type : SDT_TAPE
NetBackup Drive Type: 16
Removable : Yes
Device Supports: SCSI-3
Flags : 0x0
Reason: 0x0
------------------------------------------------------------
Device Name : "Tape1"
Passthru Name: "Tape1"
Volume Header: ""
Port: 6; Bus: 0; Target: 0; LUN: 12
Inquiry : "HP Ultrium 3-SCSI R210"
Vendor ID : "HP "
Product ID : "Ultrium 3-SCSI "
Product Rev: "R210"
Serial Number: "6aA5s4n41d"
WWN : ""
WWN Id Type : 0
Device Identifier: "HP Ultrium 3-SCSI 6aA5s4n41d"
Device Type : SDT_TAPE
NetBackup Drive Type: 16
Removable : Yes
Device Supports: SCSI-3
Flags : 0x0
Reason: 0x0
------------------------------------------------------------
Device Name : "Tape0"
Passthru Name: "Tape0"
Volume Header: ""
Port: 6; Bus: 0; Target: 0; LUN: 3
Inquiry : "HP Ultrium 3-SCSI R210"
Vendor ID : "HP "
Product ID : "Ultrium 3-SCSI "
Product Rev: "R210"
Serial Number: "6aA5s4n41c"
WWN : ""
WWN Id Type : 0
Device Identifier: "HP Ultrium 3-SCSI 6aA5s4n41c"
Device Type : SDT_TAPE
NetBackup Drive Type: 16
Removable : Yes
Device Supports: SCSI-3
Flags : 0x0
Reason: 0x0
------------------------------------------------------------
Device Name : "Tape3"
Passthru Name: "Tape3"
Volume Header: ""
Port: 6; Bus: 0; Target: 0; LUN: 4
Inquiry : "HP Ultrium 3-SCSI R210"
Vendor ID : "HP "
Product ID : "Ultrium 3-SCSI "
Product Rev: "R210"
Serial Number: "6aA5s4n41f"
WWN : ""
WWN Id Type : 0
Device Identifier: "HP Ultrium 3-SCSI 6aA5s4n41f"
Device Type : SDT_TAPE
NetBackup Drive Type: 16
Removable : Yes
Device Supports: SCSI-3
Flags : 0x0
Reason: 0x0
------------------------------------------------------------
Device Name : "Tape0"
Passthru Name: "Tape0"
Volume Header: ""
Port: 7; Bus: 0; Target: 0; LUN: 0
Inquiry : "HP Ultrium 3-SCSI R210"
Vendor ID : "HP "
Product ID : "Ultrium 3-SCSI "
Product Rev: "R210"
Serial Number: "6aA5s4n41c"
WWN : ""
WWN Id Type : 0
Device Identifier: "HP Ultrium 3-SCSI 6aA5s4n41c"
Device Type : SDT_TAPE
NetBackup Drive Type: 16
Removable : Yes
Device Supports: SCSI-3
Flags : 0x0
Reason: 0x0
------------------------------------------------------------
Device Name : "Tape1"
Passthru Name: "Tape1"
Volume Header: ""
Port: 7; Bus: 0; Target: 0; LUN: 1
Inquiry : "HP Ultrium 3-SCSI R210"
Vendor ID : "HP "
Product ID : "Ultrium 3-SCSI "
Product Rev: "R210"
Serial Number: "6aA5s4n41d"
WWN : ""
WWN Id Type : 0
Device Identifier: "HP Ultrium 3-SCSI 6aA5s4n41d"
Device Type : SDT_TAPE
NetBackup Drive Type: 16
Removable : Yes
Device Supports: SCSI-3
Flags : 0x0
Reason: 0x0
------------------------------------------------------------
Device Name : "Tape2"
Passthru Name: "Tape2"
Volume Header: ""
Port: 7; Bus: 0; Target: 0; LUN: 2
Inquiry : "HP Ultrium 3-SCSI R210"
Vendor ID : "HP "
Product ID : "Ultrium 3-SCSI "
Product Rev: "R210"
Serial Number: "6aA5s4n41e"
WWN : ""
WWN Id Type : 0
Device Identifier: "HP Ultrium 3-SCSI 6aA5s4n41e"
Device Type : SDT_TAPE
NetBackup Drive Type: 16
Removable : Yes
Device Supports: SCSI-3
Flags : 0x0
Reason: 0x0
------------------------------------------------------------
Device Name : "Tape3"
Passthru Name: "Tape3"
Volume Header: ""
Port: 7; Bus: 0; Target: 0; LUN: 3
Inquiry : "HP Ultrium 3-SCSI R210"
Vendor ID : "HP "
Product ID : "Ultrium 3-SCSI "
Product Rev: "R210"
Serial Number: "6aA5s4n41f"
WWN : ""
WWN Id Type : 0
Device Identifier: "HP Ultrium 3-SCSI 6aA5s4n41f"
Device Type : SDT_TAPE
NetBackup Drive Type: 16
Removable : Yes
Device Supports: SCSI-3
Flags : 0x0
Reason: 0x0
I can also see sevral(almost hundreds) of following messages.
DeviceIoControl() error on bus 0, target 0, lun 0 (2:The system cannot find the
file specified. )
DeviceIoControl() error on bus 0, target 0, lun 0 (2:The system cannot find the
file specified. )
Regards,
β11-15-2011 06:42 AM
Don't think netbackup support dual paths to tape and robots, didn't when I asked for version 6.5
Regards
Michael
β11-15-2011 07:00 AM
If you want NetBackup to manage the path selection, you will need to disable the OS related multipathing. The end result should be 8 logical tape drives, in Devices, and in the scan output.
β11-15-2011 07:10 AM
From your output above (cut, pasted, rearranged, and otherwise cleaned up):
------------------------------------------------------------
Device Name : "Tape0"
Port: 6; Bus: 0; Target: 0; LUN: 3
Port: 7; Bus: 0; Target: 0; LUN: 0
Serial Number: "6aA5s4n41c"
Device Identifier: "HP Ultrium 3-SCSI 6aA5s4n41c"
------------------------------------------------------------
Device Name : "Tape1"
Port: 6; Bus: 0; Target: 0; LUN: 12
Port: 7; Bus: 0; Target: 0; LUN: 1
Serial Number: "6aA5s4n41d"
Device Identifier: "HP Ultrium 3-SCSI 6aA5s4n41d"
------------------------------------------------------------
Device Name : "Tape2"
Port: 6; Bus: 0; Target: 0; LUN: 1
Port: 7; Bus: 0; Target: 0; LUN: 2
Serial Number: "6aA5s4n41e"
Device Identifier: "HP Ultrium 3-SCSI 6aA5s4n41e"
------------------ ------------------------------------------
Device Name : "Tape3"
Port: 6; Bus: 0; Target: 0; LUN: 4
Port: 7; Bus: 0; Target: 0; LUN: 3
Serial Number: "6aA5s4n41f"
Device Identifier: "HP Ultrium 3-SCSI 6aA5s4n41f"
Notice, the Device paths on port 7 appear in Logical Unit Order, while on port 6, the LUN mapping is seemingly random. Persistant Binding will allow you to specifiy which devices appear where, which is what you want for NetBackup (given that you're configuring the tape devices by defining which Port, Bus, Target, and LUN the tape drive appears at)
β11-16-2011 07:05 AM
Hi Kevin,
You are correct... I did not past following as it was too long. Though I am still worried about it.
C:\Program Files\Veritas\Volmgr\bin>scan >> c:\scan.txt
DeviceIoControl() error on bus 0, target 0, lun 0 (2:The system cannot find the
file specified. )
DeviceIoControl() error on bus 0, target 0, lun 0 (2:The system cannot find the
file specified. )
DeviceIoControl() error on bus 0, target 0, lun 0 (2:The system cannot find the
file specified. )
DeviceIoControl() error on bus 0, target 0, lun 0 (2:The system cannot find the
file specified. )
DeviceIoControl() error on bus 0, target 0, lun 0 (2:The system cannot find the
file specified. )
DeviceIoControl() error on bus 0, target 0, lun 0 (2:The system cannot find the
file specified. )
DeviceIoControl() error on bus 0, target 0, lun 0 (2:The system cannot find the
file specified. )
DeviceIoControl() error on bus 0, target 0, lun 0 (2:The system cannot find the
file specified. )
DeviceIoControl() error on bus 0, target 0, lun 0 (2:The system cannot find the
file specified. )
DeviceIoControl() error on bus 0, target 0, lun 0 (2:The system cannot find the
file specified. )
DeviceIoControl() error on bus 0, target 0, lun 0 (2:The system cannot find the
file specified. )
DeviceIoControl() error on bus 0, target 0, lun 0 (2:The system cannot find the
file specified. )
DeviceIoControl() error on bus 0, target 0, lun 0 (2:The system cannot find the
file specified. )
DeviceIoControl() error on bus 0, target 0, lun 0 (2:The system cannot find the
file specified. )
DeviceIoControl() error on bus 0, target 0, lun 0 (2:The system cannot find the
file specified. )
DeviceIoControl() error on bus 0, target 0, lun 25 (2:The system cannot find the
file specified. )
DeviceIoControl() error on bus 0, target 0, lun 25 (2:The system cannot find the
file specified. )
DeviceIoControl() error on bus 0, target 0, lun 25 (2:The system cannot find the
file specified. )
DeviceIoControl() error on bus 0, target 0, lun 25 (2:The system cannot find the
file specified. )
DeviceIoControl() error on bus 0, target 0, lun 25 (2:The system cannot find the
file specified. )
DeviceIoControl() error on bus 0, target 0, lun 25 (2:The system cannot find the
file specified. )
DeviceIoControl() error on bus 0, target 0, lun 25 (2:The system cannot find the
file specified. )
DeviceIoControl() error on bus 0, target 0, lun 25 (2:The system cannot find the
file specified. )
DeviceIoControl() error on bus 0, target 0, lun 25 (2:The system cannot find the
file specified. )
DeviceIoControl() error on bus 0, target 0, lun 25 (2:The system cannot find the
file specified. )
DeviceIoControl() error on bus 0, target 0, lun 25 (2:The system cannot find the
file specified. )
DeviceIoControl() error on bus 0, target 0, lun 25 (2:The system cannot find the
file specified. )
DeviceIoControl() error on bus 0, target 0, lun 25 (2:The system cannot find the
file specified. )
DeviceIoControl() error on bus 0, target 0, lun 25 (2:The system cannot find the
file specified. )
DeviceIoControl() error on bus 0, target 0, lun 25 (2:The system cannot find the
file specified. )
DeviceIoControl() error on bus 0, target 0, lun 50 (2:The system cannot find the
file specified. )
DeviceIoControl() error on bus 0, target 0, lun 50 (2:The system cannot find the
file specified. )
DeviceIoControl() error on bus 0, target 0, lun 50 (2:The system cannot find the
file specified. )
DeviceIoControl() error on bus 0, target 0, lun 50 (2:The system cannot find the
file specified. )
DeviceIoControl() error on bus 0, target 0, lun 50 (2:The system cannot find the
file specified. )
DeviceIoControl() error on bus 0, target 0, lun 50 (2:The system cannot find the
file specified. )
DeviceIoControl() error on bus 0, target 0, lun 50 (2:The system cannot find the
file specified. )
DeviceIoControl() error on bus 0, target 0, lun 50 (2:The system cannot find the
file specified. )
DeviceIoControl() error on bus 0, target 0, lun 50 (2:The system cannot find the
file specified. )
DeviceIoControl() error on bus 0, target 0, lun 50 (2:The system cannot find the
file specified. )
DeviceIoControl() error on bus 0, target 0, lun 50 (2:The system cannot find the
file specified. )
DeviceIoControl() error on bus 0, target 0, lun 50 (2:The system cannot find the
file specified. )
DeviceIoControl() error on bus 0, target 0, lun 50 (2:The system cannot find the
file specified. )
DeviceIoControl() error on bus 0, target 0, lun 50 (2:The system cannot find the
file specified. )
DeviceIoControl() error on bus 0, target 0, lun 50 (2:The system cannot find the
file specified. )
DeviceIoControl() error on bus 0, target 0, lun 67 (2:The system cannot find the
file specified. )
DeviceIoControl() error on bus 0, target 0, lun 67 (2:The system cannot find the
file specified. )
DeviceIoControl() error on bus 0, target 0, lun 67 (2:The system cannot find the
file specified. )
DeviceIoControl() error on bus 0, target 0, lun 67 (2:The system cannot find the
file specified. )
DeviceIoControl() error on bus 0, target 0, lun 67 (2:The system cannot find the
file specified. )
DeviceIoControl() error on bus 0, target 0, lun 67 (2:The system cannot find the
file specified. )
DeviceIoControl() error on bus 0, target 0, lun 67 (2:The system cannot find the
file specified. )
DeviceIoControl() error on bus 0, target 0, lun 67 (2:The system cannot find the
file specified. )
DeviceIoControl() error on bus 0, target 0, lun 67 (2:The system cannot find the
file specified. )
DeviceIoControl() error on bus 0, target 0, lun 67 (2:The system cannot find the
file specified. )
DeviceIoControl() error on bus 0, target 0, lun 67 (2:The system cannot find the
file specified. )
DeviceIoControl() error on bus 0, target 0, lun 67 (2:The system cannot find the
file specified. )
DeviceIoControl() error on bus 0, target 0, lun 67 (2:The system cannot find the
file specified. )
DeviceIoControl() error on bus 0, target 0, lun 67 (2:The system cannot find the
file specified. )
DeviceIoControl() error on bus 0, target 0, lun 67 (2:The system cannot find the
file specified. )
DeviceIoControl() error on bus 0, target 0, lun 82 (2:The system cannot find the
file specified. )
DeviceIoControl() error on bus 0, target 0, lun 82 (2:The system cannot find the
file specified. )
DeviceIoControl() error on bus 0, target 0, lun 82 (2:The system cannot find the
file specified. )
DeviceIoControl() error on bus 0, target 0, lun 82 (2:The system cannot find the
file specified. )
DeviceIoControl() error on bus 0, target 0, lun 82 (2:The system cannot find the
file specified. )
DeviceIoControl() error on bus 0, target 0, lun 82 (2:The system cannot find the
file specified. )
DeviceIoControl() error on bus 0, target 0, lun 82 (2:The system cannot find the
file specified. )
DeviceIoControl() error on bus 0, target 0, lun 82 (2:The system cannot find the
file specified. )
DeviceIoControl() error on bus 0, target 0, lun 82 (2:The system cannot find the
file specified. )
DeviceIoControl() error on bus 0, target 0, lun 82 (2:The system cannot find the
file specified. )
DeviceIoControl() error on bus 0, target 0, lun 82 (2:The system cannot find the
file specified. )
DeviceIoControl() error on bus 0, target 0, lun 82 (2:The system cannot find the
file specified. )
DeviceIoControl() error on bus 0, target 0, lun 82 (2:The system cannot find the
file specified. )
DeviceIoControl() error on bus 0, target 0, lun 82 (2:The system cannot find the
file specified. )
DeviceIoControl() error on bus 0, target 0, lun 82 (2:The system cannot find the
file specified. )
DeviceIoControl() error on bus 0, target 0, lun 25 (2:The system cannot find the
file specified. )
DeviceIoControl() error on bus 0, target 0, lun 25 (2:The system cannot find the
file specified. )
DeviceIoControl() error on bus 0, target 0, lun 25 (2:The system cannot find the
file specified. )
DeviceIoControl() error on bus 0, target 0, lun 25 (2:The system cannot find the
file specified. )
DeviceIoControl() error on bus 0, target 0, lun 25 (2:The system cannot find the
file specified. )
DeviceIoControl() error on bus 0, target 0, lun 25 (2:The system cannot find the
file specified. )
DeviceIoControl() error on bus 0, target 0, lun 25 (2:The system cannot find the
file specified. )
DeviceIoControl() error on bus 0, target 0, lun 25 (2:The system cannot find the
file specified. )
DeviceIoControl() error on bus 0, target 0, lun 25 (2:The system cannot find the
file specified. )
DeviceIoControl() error on bus 0, target 0, lun 25 (2:The system cannot find the
file specified. )
DeviceIoControl() error on bus 0, target 0, lun 25 (2:The system cannot find the
file specified. )
DeviceIoControl() error on bus 0, target 0, lun 25 (2:The system cannot find the
file specified. )
DeviceIoControl() error on bus 0, target 0, lun 25 (2:The system cannot find the
file specified. )
DeviceIoControl() error on bus 0, target 0, lun 25 (2:The system cannot find the
file specified. )
DeviceIoControl() error on bus 0, target 0, lun 25 (2:The system cannot find the
file specified. )
DeviceIoControl() error on bus 0, target 0, lun 50 (2:The system cannot find the
file specified. )
DeviceIoControl() error on bus 0, target 0, lun 50 (2:The system cannot find the
file specified. )
DeviceIoControl() error on bus 0, target 0, lun 50 (2:The system cannot find the
file specified. )
DeviceIoControl() error on bus 0, target 0, lun 50 (2:The system cannot find the
file specified. )
DeviceIoControl() error on bus 0, target 0, lun 50 (2:The system cannot find the
file specified. )
DeviceIoControl() error on bus 0, target 0, lun 50 (2:The system cannot find the
file specified. )
DeviceIoControl() error on bus 0, target 0, lun 50 (2:The system cannot find the
file specified. )
DeviceIoControl() error on bus 0, target 0, lun 50 (2:The system cannot find the
file specified. )
DeviceIoControl() error on bus 0, target 0, lun 50 (2:The system cannot find the
file specified. )
DeviceIoControl() error on bus 0, target 0, lun 50 (2:The system cannot find the
file specified. )
DeviceIoControl() error on bus 0, target 0, lun 50 (2:The system cannot find the
file specified. )
DeviceIoControl() error on bus 0, target 0, lun 50 (2:The system cannot find the
file specified. )
DeviceIoControl() error on bus 0, target 0, lun 50 (2:The system cannot find the
file specified. )
DeviceIoControl() error on bus 0, target 0, lun 50 (2:The system cannot find the
file specified. )
DeviceIoControl() error on bus 0, target 0, lun 50 (2:The system cannot find the
file specified. )
DeviceIoControl() error on bus 0, target 0, lun 75 (2:The system cannot find the
file specified. )
DeviceIoControl() error on bus 0, target 0, lun 75 (2:The system cannot find the
file specified. )
DeviceIoControl() error on bus 0, target 0, lun 75 (2:The system cannot find the
file specified. )
DeviceIoControl() error on bus 0, target 0, lun 75 (2:The system cannot find the
file specified. )
DeviceIoControl() error on bus 0, target 0, lun 75 (2:The system cannot find the
file specified. )
DeviceIoControl() error on bus 0, target 0, lun 75 (2:The system cannot find the
file specified. )
DeviceIoControl() error on bus 0, target 0, lun 75 (2:The system cannot find the
file specified. )
DeviceIoControl() error on bus 0, target 0, lun 75 (2:The system cannot find the
file specified. )
DeviceIoControl() error on bus 0, target 0, lun 75 (2:The system cannot find the
file specified. )
DeviceIoControl() error on bus 0, target 0, lun 75 (2:The system cannot find the
file specified. )
DeviceIoControl() error on bus 0, target 0, lun 75 (2:The system cannot find the
file specified. )
DeviceIoControl() error on bus 0, target 0, lun 75 (2:The system cannot find the
file specified. )
DeviceIoControl() error on bus 0, target 0, lun 75 (2:The system cannot find the
file specified. )
DeviceIoControl() error on bus 0, target 0, lun 75 (2:The system cannot find the
file specified. )
DeviceIoControl() error on bus 0, target 0, lun 75 (2:The system cannot find the
file specified. )
DeviceIoControl() error on bus 0, target 0, lun 88 (2:The system cannot find the
file specified. )
DeviceIoControl() error on bus 0, target 0, lun 88 (2:The system cannot find the
file specified. )
DeviceIoControl() error on bus 0, target 0, lun 88 (2:The system cannot find the
file specified. )
DeviceIoControl() error on bus 0, target 0, lun 88 (2:The system cannot find the
file specified. )
DeviceIoControl() error on bus 0, target 0, lun 88 (2:The system cannot find the
file specified. )
DeviceIoControl() error on bus 0, target 0, lun 88 (2:The system cannot find the
file specified. )
DeviceIoControl() error on bus 0, target 0, lun 88 (2:The system cannot find the
file specified. )
DeviceIoControl() error on bus 0, target 0, lun 88 (2:The system cannot find the
file specified. )
DeviceIoControl() error on bus 0, target 0, lun 88 (2:The system cannot find the
file specified. )
DeviceIoControl() error on bus 0, target 0, lun 88 (2:The system cannot find the
file specified. )
DeviceIoControl() error on bus 0, target 0, lun 88 (2:The system cannot find the
file specified. )
DeviceIoControl() error on bus 0, target 0, lun 88 (2:The system cannot find the
file specified. )
DeviceIoControl() error on bus 0, target 0, lun 88 (2:The system cannot find the
file specified. )
DeviceIoControl() error on bus 0, target 0, lun 88 (2:The system cannot find the
file specified. )
DeviceIoControl() error on bus 0, target 0, lun 88 (2:The system cannot find the
file specified. )
C:\Program Files\Veritas\Volmgr\bin>c:\scan.txt
Looks like the zoning is not proper. Please advice.
β11-18-2011 03:45 PM
That looks like it thinks there should be a device on each of those LUN's listed, but the device is locked on another path...