08-25-2015 05:57 AM
Hello,
I have an issue in that I can;t get Accelerator to work when I tick it in my Policy; here is my setup.
NBU 7.6.0.4
1 x Master Server - Windows 2008 R2 (Virtual Machine on Vmware)
2 x Physical Media Servers - Windows 2008 R2
1 x HP 6200 StoreOnce
I have installed the OST plugin 3.1.2 onto the media servers, and I have applied the latest device mapping (1.124) onto the Media and Master Server; the firmware on the B6200 StoreOne is 3.12.
According to all the documentation I have read, the combination of OST 3.1.2, the new device mapping, and the B6200 firmware being at 3.12 should allow me to use Accelerator in my backup policy.
I have set up a catalysts store on the B6200, and had added it as a Storage Server, backup to this works as expected, but its when I click Use Accelerator that it doesn't like, and I get the following pop up message
The pop up sees the StoreOnce (DST00012A etc), but it fails to let me use it.
Any ideas ?
regards
Jim
08-25-2015 06:24 AM
could show us the output of below command
bpstulist -label NBU_Wyn1_Backup_SUnit -L
and by any chage..Does the Schedule in the policy selected with any other stroage unit.
08-26-2015 07:24 AM
Hi RamNagalla, the output from the file is
Label: NBU_Wyn1_Backup_SUnit
Storage Unit Type: Disk
Media Subtype: DiskPool (6)
Host Connection: dsb00023.xxxxx.uk
Host Connection: dsb00024.xxxxx.uk
Concurrent Jobs: 16
On Demand Only: yes
Robot Type: (not robotic)
Max Fragment Size: 524288
Max MPX: 1
Block Sharing: no
File System Export: no
Ok On Root: no
Disk Pool: NBU_Wyn1_Backup
Snapshots: no
Replication Primary: no
Replication Source: no
Replication Target: no
Mirror : no
Independent : no
I had to change the domain name to "xxxxx" as I am not allowed to send that out.
I have only just set this up, no other storage unit is selected.
thanks
08-26-2015 10:52 AM
Can you give the output of the disk pool configuration?
nbdevquery -listdp -dp NBU_Wyn1_Backup -stype <storageservertype>
To get storage server type exactly, it would be listed under the storage server name from the following command:
nbdevquery -liststs