10-08-2015 02:59 AM
Hello ,
We are facing one issue with NDMP.
We have configured the NDMP drives and storage unit through GUI. device configuration has been completed successfully. After that , we have started the backup on storage unit but not single drive is able to mount the media.
What needs to check from our end for NDMP as this is the first time we are facing this issue.
10/08/2015 11:12:53 - mounting CM3021
10/08/2015 11:25:38 - Info ndmpagent (pid=0) done
10/08/2015 11:25:38 - Error bptm (pid=26799) media manager terminated during mount of media id CM3021, possible media mount timeout
10/08/2015 11:25:38 - Error bptm (pid=26799) media manager terminated by parent process
10/08/2015 11:25:38 - Error ndmpagent (pid=26797) NDMP backup failed, path = UNKNOWN
10/08/2015 11:25:38 - Info ndmpagent (pid=0) done. status: 150: termination requested by administrator
10/08/2015 11:25:38 - Error ndmpagent (pid=26797) connection 100341d40 ndmp_message_process_one failed, status = 18 (NDMP_XDR_DECODE_ERR)
10/08/2015 11:25:38 - end writing
10/08/2015 11:25:39 - Error ndmpagent (pid=26797) connection 100342080 ndmp_message_process_one failed, status = 18 (NDMP_XDR_DECODE_ERR)
10/08/2015 13:06:39 - mounting BW0096
10/08/2015 13:21:44 - Error bptm (pid=27014) error requesting media, TpErrno = Robot operation failed
10/08/2015 13:21:44 - Warning bptm (pid=27014) media id BW0096 load operation reported an error
10/08/2015 13:21:44 - current media BW0096 complete, requesting next media Any
10/08/2015 13:22:26 - Waiting for scan drive stop HP.ULTRIUM3-SCSI.003, Media server: xxxx
10/08/2015 13:22:29 - granted resource BW0096
10/08/2015 13:22:29 - granted resource HP.ULTRIUM3-SCSI.003
10/08/2015 13:22:29 - granted resource SF440-hcart3-robot-tld-1-hbbfczfsc2
10/08/2015 13:22:30 - Info bptm (pid=27014) Waiting for mount of media id BW0096 (copy 1) on server xxxx.
10/08/2015 13:22:30 - mounting BW0096
10/08/2015 13:37:34 - Error bptm (pid=27014) error requesting media, TpErrno = Robot operation failed
10/08/2015 13:37:35 - Warning bptm (pid=27014) media id BW0096 load operation reported an error
10/08/2015 13:37:35 - current media BW0096 complete, requesting next media Any
Regards,
Sagar
Solved! Go to Solution.
10-12-2015 12:37 AM
Your initial post clearly showed media mount issues.
Your last post shows issues with the filer itself.
Which make/model filer?
What is OS and NDMP version on the filer?
Have you checked the filer system log for errors?
Similar errors in these forum posts:
https://www-secure.symantec.com/connect/forums/ndmpdatagetstatefailed-status-18-ndmpxdrdecodeerr
https://www-secure.symantec.com/connect/forums/ndmpxdrdecodeerr
10-08-2015 05:44 AM
The libary could not load the tape into the drive "error requesting media, TpErrno = Robot operation failed"
Check that you're library is working fine. If you've configured the robot on another host, try loading and unloading the drives from that server.
10-08-2015 06:16 AM
What is the version of NetBackup and what make model NAS filer is this ?
10-08-2015 06:20 AM
10-10-2015 11:56 AM
will you be able to get the output for the below commads from NetBackup Master server?
tpautoconf -probe
tpautoconf -verify
Note: these commands will not make any impact to the Master server.
10-11-2015 11:37 PM
Hello All,
Everything is working fine for normal backups except NDMP backups. we have approx. 15 NDMP bcakups which are working fine. Only this host having the issue. There is no issue with tape library. Please suggest.
10/12/2015 11:57:01 - Error ndmpagent (pid=10112) ndmp_enable_extensions: ndmp_config_get_ext_list failed. status = 18 (NDMP_XDR_DECODE_ERR)
10/12/2015 11:57:01 - Error ndmpagent (pid=10112) ndmp_authenticate_connection: ndmp_enable_extensions failed
10/12/2015 11:57:02 - Error ndmpagent (pid=10112) ndmp_config_get_connection_type returned 12
10/12/2015 11:57:02 - Error ndmpagent (pid=10112) ndmp_data_connect_v3 failed, status = -1 (-1)
10/12/2015 11:57:02 - Error ndmpagent (pid=10112) NDMP backup failed, path = /export/ndc_fc_precut_dump
10/12/2015 11:57:02 - Error ndmpagent (pid=10112) ndmp_data_get_state_failed, status = 12 (NDMP_EOF_ERR)
10/12/2015 11:57:02 - Error ndmpagent (pid=10112) write socket err 32 (Broken pipe)
----------------------------------------------------------------------------
10/12/2015 11:55:24 - positioned DM3090; position time: 0:00:06
10/12/2015 11:55:24 - begin writing
10/12/2015 11:58:36 - Error ndmpagent (pid=8691) ndmp_data_connect_v3 failed, status = -1 (-1)
10/12/2015 11:58:37 - Error ndmpagent (pid=8691) NDMP backup failed, path = /export/dc_fc_precut_dump
10/12/2015 11:58:37 - Info bpbrm (pid=8660) sending message to media manager: STOP BACKUP hbdfczfsc2_1444631084
10/12/2015 11:58:47 - Info bpbrm (pid=8660) media manager for backup id hbdfczfsc2_1444631084 exited with status 0: the requested operation was successfully completed
10/12/2015 11:58:47 - end writing; write time: 0:03:23
10-12-2015 12:37 AM
Your initial post clearly showed media mount issues.
Your last post shows issues with the filer itself.
Which make/model filer?
What is OS and NDMP version on the filer?
Have you checked the filer system log for errors?
Similar errors in these forum posts:
https://www-secure.symantec.com/connect/forums/ndmpdatagetstatefailed-status-18-ndmpxdrdecodeerr
https://www-secure.symantec.com/connect/forums/ndmpxdrdecodeerr
10-12-2015 12:51 AM
Hello Mam,
PFA.
Which make/model filer?
Below are the OSC ZFS model
Oracle ZFS Storage ZS3-ES
What is OS and NDMP version on the filer?
os type "SunOS"
os version "5.11"
Have you checked the filer system log for errors?
Have asked for filer logs to concern team.
Kindly find the logs uploaded below if required.
bptm
bpbrm
ndmp
ndmpagent.
Regards,
Sagar
10-12-2015 12:58 AM
Have you had a look at the 2 posts above?
Have you tried to locate NDMP error codes for this device on Oracle website (you will probably need Oracle user logon) ?
10-12-2015 01:19 AM
verify and probe are working fine. We hav also created the storage units successfully.
Regards,
Sagar
10-12-2015 01:24 AM
Please have a look at the 2 links in my post a bit further up.
The problem is on the filer - not NBU config.
10-12-2015 02:19 AM
I have saw that link , but its not related to our environment. We need to justify to the client that this isuee from filer end. what can we do to do the same ?
Regards,
Sagar
10-12-2015 02:33 AM
Check system logs on the filer. (/var/adm/messages if same as 'normal' Solaris).
Also as per my previous posts - search Oracle web site for NDMP error codes for this filer.
One of the posts above pointed to network config on the filer NIC - IMHO, worth exploring.
I cannot see how you are going to fix this from NBU end - you need to work with Filer admins and support.
The fact that same NBU version is working well with other filers is proof the the problem is not with NBU.
10-12-2015 05:58 AM
10-12-2015 07:18 AM
Hello All,
As per technote from Marrianne mam , we have checked the setting from network end and found that , ICMP port is blocking the traffic between NDMP and media server. After enabling the port , backup has started on its storage unit.
Thank you for your support.
Thanks and Regards,
Sagar
10-12-2015 07:34 AM
Thanks for the feedback!