03-11-2014 07:35 AM
NBU = 7.1.0.3
Master and Media servers = Windows 2008 R2
SAN = NetApp C-Mode 8.1.3
Trying to add a new NDMP Storage Unit. I've configured the same for three additional hosts with no issues, but the fourth is not showing up. I have a working static DNS record which the IP is pingable. The NDMP Host credientials configured and took in NBU.
I'm not sure where else to chack. Any assistnace is welcomed.
T
Solved! Go to Solution.
03-11-2014 08:02 AM
Did you configure the Drives for the NDMP host?
does the tpconfig -d command showing the drives attached to NDMP when you run it from the media server that is used to manage the NDMP drives?
03-11-2014 08:02 AM
Did you configure the Drives for the NDMP host?
does the tpconfig -d command showing the drives attached to NDMP when you run it from the media server that is used to manage the NDMP drives?
03-11-2014 12:03 PM
Jusr curious, what does tpautoconf -probe ndmp_host_name return?
03-11-2014 12:39 PM
I agree - you need to configure Devices before you can add a STU.
After you have added credentials and verified them, does the NDMP server show up when you run
'nbemmcmd -listhosts -verbose' on the master server?.