03-19-2013 11:06 AM
Solved! Go to Solution.
03-27-2013 12:35 PM
Exact steps are listed in NBU Installatiion Guide: http://www.symantec.com/docs/DOC5154
See chapter 7; Installing NetBackup client software
Read the section called: Remote (push) installations.
Firstly install 7.5 Client software for HP-UX on the master server as per this topic in the manual:
Adding a UNIX client after initial server installation
Follow all the steps as per the manual, then re-install 7.5.0.5 Client patch with 'NB_update.install -p' to force-install the patch.
Next, decide which push-install method and follow steps as per the manual:
Hope this helps.
03-19-2013 11:19 AM
03-19-2013 11:43 AM
03-19-2013 01:25 PM
it is not clear to me if the linux is a master or media server. I assume that it is a media server with the windows 2008 R2 as a master.
You have to install the client binaries for HPUX to the linux media server. The binaries can be installed by running the ./install of the clients iso.
Configure the client to a policy. be careful to use the right OS and hardware.
run on the media server the command:
./install_client_files ssh client_name
03-19-2013 08:21 PM
03-19-2013 11:47 PM
the same steps.
Only the update_clients is diferent on media sever.
You can find more about install_client_files at the netbackup administration manual.
03-27-2013 12:35 PM
Exact steps are listed in NBU Installatiion Guide: http://www.symantec.com/docs/DOC5154
See chapter 7; Installing NetBackup client software
Read the section called: Remote (push) installations.
Firstly install 7.5 Client software for HP-UX on the master server as per this topic in the manual:
Adding a UNIX client after initial server installation
Follow all the steps as per the manual, then re-install 7.5.0.5 Client patch with 'NB_update.install -p' to force-install the patch.
Next, decide which push-install method and follow steps as per the manual:
Hope this helps.
03-28-2013 03:36 AM