03-01-2022 08:53 PM
I am using standalone lto8 tape drive with Netbackup 8.1. I am getting error 2001 on all backups. Please help configuring the drive.
03-02-2022 12:59 AM
Start with showing the result of command vmoprcmd -d
03-02-2022 06:10 AM
Hello zeeshanopel,
Try to check media server services and also check the below two command output.
vmoprcmd -d or tpconfig -l
Mostly this issue related with no drives are available for this job, check the dive connectivity.
03-03-2022 12:48 AM
Hello
I would have started with scan command on the media server which sees this drive, to make sure this tape drive is visible on media server. Than run the tpconfig -d and vmoprcmd as well bpstulist -U
Your error stands for:
bperror -S 2001
No drives are available for this job
A job requested a tape drive, but no eligible drive path was configured for the job.
so not sure where is the issue... Please provide outcomes from all above commands... path to these commands is <installdir>\volmgr\bin
03-03-2022 02:12 AM
C:\Program Files\Veritas\Volmgr\bin>vmoprcmd -d
PENDING REQUESTS
ReqId User RecMID ExtMID Density Mode Time Barcode VolGroup
2 A00001 hcart2 Write 16:30 -------- ---
DRIVE STATUS
Drv Type Control User Label RecMID ExtMID Ready Wr.Enbl. ReqId
0 hcart2 AVR No Yes Yes 0
ADDITIONAL DRIVE STATUS
Drv DriveName Shared Assigned Comment
0 HPE.ULTRIUM8-SCSI.00 No -
C:\Program Files\Veritas\Volmgr\bin>
C:\Program Files\Veritas\Volmgr\bin>tpconfig -l
Device Robot Drive Robot Drive Device
Type Num Index Type DrNum Status Comment Name Path
drive - 0 hcart2 - UP - HPE.ULTRIUM8-SCSI.000 {4,2,1,0}
03-03-2022 02:42 AM
C:\Program Files\Veritas\Volmgr\bin>tpconfig -d
Id DriveName Type Residence
SCSI coordinates/Path Status
****************************************************************************
0 HPE.ULTRIUM8-SCSI... hcart2 Standalone
{4,2,1,0} UP
Currently defined robotics are:
EMM Server = ppglhrfssvr01.parco.com.pk
03-06-2022 08:56 PM
Please help
03-06-2022 09:04 PM
Hi @zeeshanopel
NetBackup isn't really designed to operate with standalone tape drives (much prefers robotic libraries).
Anyway - it can be made to work - have a look at this article to see if it helps: https://www.veritas.com/support/en_US/article.100030155
David