Solved: You have found the correct

Yogesh_Patil · ‎10-19-2015

Hi,

Target: Install and configure new Symantec Netbackup 7.6.0.1 cluster enviroment with SLP part.

(On another location with different ip address range)

Currently I have Windows 2008 R2 Ent. Server (VM) = 2 node. with windows cluster configured.

But most of time cluster service is showing down status due to some issue.

Now We are planning to installed both new fresh Master server with cluster netbackup enviroment.

As per my knowledge I will the below steps:

1) Install both new server OS

2) Copy master server host file from current server to new servers.

3) Install Netbackup master server software on one of primary server.

4) Configure the new policy and check the backup status.

OR

a.) If we want to setup same configuration (Policy, SLP), than restore the Catalog backup.

b.) Before install netbackup software we need to make sure new server host name same as current server,

5) Cluster configuration:

a) Currently cluster configured on Windows server, same type we will do it.

OR

b) We will configure the symantec netbackup cluster configuration with help of

Please suggest the best for Symantec netbackup cluster enviroment configuration with steps.

Marianne · ‎10-20-2015

You have found the correct manual - here is the correct URL:
NetBackup Clustered Master Server Administrator's Guide

Follow the steps in the manual to install NBU and then patch to the same level as before.

Recover NBU catalog from existing clustered master.

The catalog recovery will restore all previous config and image catalog.

**** EDIT ****

Some more reading matter - look at the section for clustered master server in this Disaster Recovery TN: http://www.veritas.com/docs/000090837