I have two NBU master server, old (srv01) and new (srv02). The main idea is manual migrate all setting and fix this settings in the document.
Srv01 Master – Physical, SRV 2008R2, NBU 7.4 – upgrade to 7.6 – upgrade to 8.0 – upgrade to 8.1 + patches
Srv02 Master – VM, SRV 2016, NBU 8.1 + patches
MS AD– srv01.contoso.com, srv02.contoso.com
Access control (in the master server properties) – set to “Automatic” on the both servers
Srv01 and Srv02 access control configured as CONTOSO/USER_A, CONTOSO/USER_B in groups NBU_Admin and NBU_Security_Admin
Now I have two problems with access control.
I login in SRV01 and SRV02 as CONTOSO/USER_A
If I login in GUI on SRV01 with “Use Active Directory login credentials” – all work fine
If I login in GUI on SRV02 with “Use Active Directory login credentials” – all work, except security management
If I login in GUI on SRV02 without “Use Active Directory” chechbox, but with CONTOSO/USER_A username and password – all work.
The same situation with CONTOSO/USER_B – if he login with “Use Active Directory login credentials” – he have the message “You do not have access to Host Management / Certificate / Global security access”
I use some scripts on SRV01, something like
bpimagelist.exe -d 01/01/2018 -e 03/27/2018
I do not have any problem on SRV01, and have authorization problem on SRV02 –I cannot run “bpimagelist.exe” before run “bpnbat –login”
Well, of course, I can rise uptime up to a maximum of 30 day, but I still work without bpnbat on SRV01. How I could configure it?
Solved! Go to Solution.
Is UAC enabled on one and disabled on the other? Both GUI and scripts can be affected if UAC is active and you haven't right-clicked and said "run as admin".
UAC settings were different (1 on old SRV01, 3 on SRV02), but there are no any effects, when I moved UAC to level 1 on SRV02 (and reboot server after that).
Well, this problem connected with another -
I have import error, when I login with "use AD" checkbox
Initiation of bptm process to phase 1 import media id NNNNL5 failed: user id was not superuser.
BPCD on mybackup.contoso.com exited with status 140: user id was not superuser
and normal import, when I login as email@example.com and manual password
In the same time, import from storage work correct.