10-30-2018 11:24 PM
Hi
I have installed Netbackup Agent Version 8.0 on one of my Linux clients , There are no firewall or iptaples configured and the status of #ufw status is Inactive . I have added this client in my master server , but I'm not able to connect to it .I can not Telnet to 1556 port . and I'm sure that Netbackup client agent is up .( /usr/openv/netbackup start) .
what should I do ?
Solved! Go to Solution.
10-31-2018 01:09 AM
You need to check if these processes are running using 'ps -ef'.
If you actually ran these commands, it would probably start the processes if they were not running previously.
10-31-2018 12:15 AM
Have you checked if NBU is actually running on the client?
Check for :
/opt/VRTSpbx/bin/pbx_exchange
/usr/openv/netbackup/bin/vnetd -standalone
/usr/openv/netbackup/bin/bpcd -standalone
10-31-2018 12:53 AM - edited 10-31-2018 01:10 AM
@Mariannes I get nothing when I execute those commands
10-31-2018 01:09 AM
You need to check if these processes are running using 'ps -ef'.
If you actually ran these commands, it would probably start the processes if they were not running previously.
10-31-2018 01:28 AM
no nothing happend
10-31-2018 01:38 AM
The commands would not display any output.
Have you checked processes with 'ps -ef' ?
Or
ps -ef | egrep 'pbx_exchange|vnetd|bpcd' ?
Please see https://www.veritas.com/support/en_US/doc/15179611-130506750-0/v40133623-130506750
10-31-2018 08:48 AM
@Kasra_Hashemi Please inspect the installation log, I don't seems the client has been correctly installed.
What Linux distribution are you using ?
Is it a 64 bit edition ?
11-01-2018 12:58 AM
Have you been able to check if NBU processes are running on the client?
Please also have a look at this doc (Ubuntu is also mentioned):
https://www.veritas.com/support/en_US/article.000106399
The TN is for NBU servers, but if the issue is with OS startup method, then clients will also be affected.