02-28-2018 11:25 PM
Hi All,
Trying to setup NBU appliance 5240 usng the default IP 192.168.229.233, but unable to do so as i am not able to ping the IP. Is the default IP changed or is there anything i need to do ?
NBU Version 3.1
Thanks,
Nayab
Solved! Go to Solution.
03-01-2018 01:31 AM
You should be able to login on a screen attached to the VGA port. If so the CLISH> Network> Netstat command should show you if any packets have been received - if zero you have an external network issue. Alternatively try a RJ45 cable direct to a laptop which has its IP ethernet address say 192.168.229.234.
Andrew
03-01-2018 01:31 AM
You should be able to login on a screen attached to the VGA port. If so the CLISH> Network> Netstat command should show you if any packets have been received - if zero you have an external network issue. Alternatively try a RJ45 cable direct to a laptop which has its IP ethernet address say 192.168.229.234.
Andrew
03-01-2018 11:57 PM
It turns out to be my laptop/cable problem....