04-13-2015 01:05 AM
Hi All,
I am trying to import images at DR site and getting below error for few tapes
4/13/2015 1:18:37 PM - begin Import
4/13/2015 1:18:39 PM - Error bpimport(pid=10688) Status = extended error status has been encountered, check logs.
4/13/2015 1:18:39 PM - end Import; elapsed time: 0:00:02
4/13/2015 1:18:39 PM - requesting resource PD1170
4/13/2015 1:18:39 PM - Error nbjm(pid=8348) NBU status: 830, EMM status: No drives are available
4/13/2015 1:18:39 PM - Error nbjm(pid=8348) NBU status: 830, EMM status: No drives are available
4/13/2015 1:18:40 PM - Info bptm(pid=10872) start
4/13/2015 1:18:40 PM - started process bptm (10872)
4/13/2015 1:18:40 PM - Error bptm(pid=10872) NBJM returned an extended error status: No drives are available (2001)
extended error status has been encountered, check logs(252)
4/13/2015 1:18:40 PM - Info bptm(pid=10872) EXITING with status 252 <----------
Solved! Go to Solution.
04-13-2015 01:14 AM
Have you checked that the newly added media-id where you want to import from is the same density as the tape drives?
For example - LTO4 drive can read a LTO3 tape, but if densities in NBU are different, NBU will not assign a drive to do the import.
Densities MUST match.
Check and compare output of the following:
On master:
vmquery -m PD1170
On media server that must perform the import:
tpconfig -l
(Above commands are in ...\veritas\volmgr\bin)
04-13-2015 01:14 AM
Have you checked that the newly added media-id where you want to import from is the same density as the tape drives?
For example - LTO4 drive can read a LTO3 tape, but if densities in NBU are different, NBU will not assign a drive to do the import.
Densities MUST match.
Check and compare output of the following:
On master:
vmquery -m PD1170
On media server that must perform the import:
tpconfig -l
(Above commands are in ...\veritas\volmgr\bin)
04-13-2015 03:19 AM
Thanks Marianne its working fine now