02-06-2023 02:25 AM
While configuring MSDP pool it gives me an error of system call (11), so can anyone tell the pre-requisites that I have to do to configure MSDP pool, Thanks.
02-06-2023 02:58 AM
02-06-2023 04:36 AM
I hav already seen that it doesn't helps.This the full error that I get:
Configuring Media Server Deduplication Pool <server_name> -system call failed(11)
Reconfigration failed for storage server PureDisk:windows.system call failed
Can you tell me the steps to create MSDP like I have created but it's not configuring? Like what I'm doing wrong?
Can you please assist I'm so confused.
02-06-2023 07:13 AM
System call failed is as the name imply a system call to Windows, where Windows wasn't able to complete the requested operation. In order to find out the reason, you need to look at the debug logs.
Try running :
vxlogview -p 51216 -t 00:01:00
This command will report ALL activities 1 minute back from command was run, and should be able to show what call went wrong.
More vxlogview help can be found in "How to use the "vxlogview" command to view Veritas NetBackup Unified logging entries"
See : https://www.veritas.com/support/en_US/article.100017099
You may have to delete the old configuration before creating a new - see : How to delete a MSDP old configuration : https://www.veritas.com/support/en_US/article.100038015
02-06-2023 09:15 AM
Thanks for detailed answer. I earlier used "tpconfig -dsh -all_hosts" and "tpconfig -delete -storage_server <servername> -stype <StorageType> -sts_user_id <userid>" to delete the old
The PDDE_deleteConfig.bat command gives ERROR:
ERROR: The system was unable to find the specified registry key or value.
An error has occured while attempting to configure. Aborting...
Please can you assist, thanks
02-06-2023 10:36 AM
I think you best option is to open a support ticket with Veritas.
They have the ability to do remote session, to see what happens.
02-06-2023 10:41 AM
I don't think I have the privilege to do so but I am doing all the steps to create MSDP pool I don't know why it's giving me this error?
02-06-2023 10:20 PM
Should I send you the output of this command: vxlogview -p 51216 -t 00:01:00 ?
02-06-2023 10:30 PM
It may help someone determine the problem. Also what is the storage you are trying to setup as MSDP - is it local disk, SAN storage or something else?
Finally - include the log file pdde-config.log (it should end up in the path <MSDP_Location>\log\pdde-config.log).
02-06-2023 11:05 PM
Hi @Nicolai @davidmoline ,
The storage I'm trying to setup as MSDP is a local disk the normal disk that I initialized, it is also where backups are stored.
I have attached the vxlogview file and pdde-config.log files, the output of is as follows:
C:\Program Files\Veritas\NetBackup\bin>vxlogview -p 51216 -t 00:01:00
2/7/2023 11:54:45.706 [MediaPerformanceTimer::calculateStateChange] : load_avg_short=0, load_avg_long=0.633333, avg_freemem_short=5.52516e+006, avg_freemem_long=5.64502e+006
2/7/2023 11:54:45.706 [MediaPerformanceTimer::calculateStateChange] short_state=3, long_state=3, m_state= 3
2/7/2023 11:54:50.899 [DefaultQueue::queueRequest] queueing RB getBirthTime : -- retry count=-1(CallbackQueue.cpp:1384)
2/7/2023 11:54:50.899 [DefaultQueue::handle_input] sending RB getBirthTime : (CallbackQueue.cpp:1510)
2/7/2023 11:54:50.899 [DefaultQueue::delayedRequest] delaying RB getBirthTime : -- retry count=-1(CallbackQueue.cpp:1341)
2/7/2023 11:54:50.899 [DefaultQueue::handle_input] (0000000002C76650) CallbackQueue now empty(CallbackQueue.cpp:1594)
2/7/2023 11:54:57.743 V-219-1 [ResourceEventMgr_i::updateInfo ] Heartbeat received from host windows
2/7/2023 11:55:02.041 V-111-1061 [ServerImpl::GetInterfaceRef] Client signature none
2/7/2023 11:55:02.041 [ServerImpl::GetInterfaceRef] For <Machine> version <1>
2/7/2023 11:55:02.041 [ServerImpl::GetInterfaceRef] retval - <0>
2/7/2023 11:55:02.041 V-111-1061 [MachineImpl::QueryMachinesWithFilter] Client signature Config_Webapp_Sig
2/7/2023 11:55:02.041 [MachineImpl::QueryMachinesWithFilter] MachineName <>, MachineNbuType <0>, MachineFlags <-1>, QueryType < (19) CEMM_MACHINE_QUERY_ALL_NBWSS_ENDPOINTS >
2/7/2023 11:55:02.041 [MachineImpl::QueryMachinesWithFilter] retval - <0>
pdde-config.log is attached. vxlogview -p 51216 -t 00:01:00 is also attached.
I Have Attached both the files; can you see the problem now.
02-07-2023 12:04 AM
btw I ran MSDP configuration and now PDDE_deleteConfig.bat is giving Output as follows:
Warning: You are about to delete the storage server configuration and the deduplication services will be stopped.
Enter Y to continue; N to end: Y
Install path=C:\Program Files\Veritas\pdde\
The operation completed successfully.
02-07-2023 12:29 AM - edited 02-07-2023 12:35 AM
Looking at the pdde_config.log file, the error appears to be what @Nick_Morris indicated previously - did you verify the fix from that article (proxy settings causing the issue)?
Is the media server also the master server?
02-07-2023 12:37 AM
Also for the logview output this doesn't show what is happening when you ran the command, you need to go back to when you ran the command so the "-t" option needs to be longer.
02-07-2023 01:00 AM
Yes, the Master and Media Server are on the same machine/server (means also same IP), and I didn't saw the proxy settings message How to diagnose them?
02-07-2023 01:35 AM
02-07-2023 01:42 AM
Hi @davidmoline @Nicolai ,
The output of the vxlogview command was a little long so I have attached the file.
About the Article I missed it actually, So I'm on it to read.
02-07-2023 02:01 AM
Hi @davidmoline @Nicolai @Nick_Morris,
Okay so I have read it, The following is the output of netsh winhttp show proxy is as follows:
netsh winhttp show proxy
Current WinHTTP proxy settings:
Direct access (no proxy server).
Mines a little different it's because of certificates I think just check the spad file I will attach the file and also this is a spad.txt file in the same path I don't know if it's alright or not.
And the pdde-config.log is also attached.
02-07-2023 02:32 AM
Also, I have one thing in mind.
Do tell me that Origin Master server and Target Master server should have same IP Or different?
02-07-2023 04:26 AM
Okay so the Target Server had high security I changed it to medium as medium was also for the Origin Server, Still MSDP is not configuring
02-07-2023 01:44 PM
Something looks wroing with the environment in general - the spad log is showing a host certificate error (which is a good effort given it is the master itself):
February 07 14:32:27 ERR [00000198FBABFDE0]: -1: NBUAPI::ValidateHost: failed to get token
February 07 14:32:27 ERR [00000198FBABFDE0]: -1: validate_host_cert: validate the host WINDOWS uuid 73e9adcf-055f-4148-8e28-dd0e44afb78b cert failed.
February 07 14:32:27 ERR [00000198FBABFDE0]: 25056: Agent at WINDOWS certificate is invalid.
I'm not sure how this can happen - but if you are inable to fix yourself, best get support to help.
Another option maybe to reinstall NetBackup and start again (if this is possible)