10-01-2015 02:11 PM
Hi Folks
I'm trying to instal SAN Client and some issues appears.
1.- Is posible to install SAN CLIENT with emulex card lpe12002e?
into HP 380 GL, linux redhat 2.6.504 as the master server.
2.- It is posible to setup FT SAN MEDIA server on the master server?
as far we were able to install stub driver but it can't recongnize any port available.
Thanks in advance.
Solved! Go to Solution.
10-01-2015 07:51 PM
Only certain QLogic hba's can be used to config FT media server.
Check NBU HCL for a list of supported hba's.
The SAN Clients can have any hba.
FT Media server can be configured on Linux or Solaris SPARC master/media servers.
Download this manual for detailed requirements and configuration:
NetBackup SAN Client and Fibre Transport Guide http://www.symantec.com/docs/DOC5189
10-01-2015 07:51 PM
Only certain QLogic hba's can be used to config FT media server.
Check NBU HCL for a list of supported hba's.
The SAN Clients can have any hba.
FT Media server can be configured on Linux or Solaris SPARC master/media servers.
Download this manual for detailed requirements and configuration:
NetBackup SAN Client and Fibre Transport Guide http://www.symantec.com/docs/DOC5189