05-03-2012 11:39 PM
Hi Guys,
I'm setting up backups for my VM Environment.
ESX 4.0
NBU 7.0
After I complete editing the policy I get the following error window:
Solved! Go to Solution.
05-09-2012 07:52 AM
Check the following:
1. That the vm backup host is a Windows server
2. That the vm in question is not a template
3. That the vm in question has all of its VMDK's on the SAN luns and not on local disk
4. That the vm has vmware tools installed and up to date
Also run the bpplinfo command with -L switch rather than the -U and show us the output
Thanks
05-06-2012 10:19 PM
Have you already tried to edit this policy again?
If this error still continues, please tell us more detail of your configuration. How did you selected each options in Snapshot Client options?
Also have a look at this technote and check name resolution for both client and ESX.
http://www.symantec.com/docs/TECH68492
05-07-2012 07:01 AM
why you dont share you policy configuration with us with bpplinfo <policy_name> -U -v , this will give us some more insights, the snapshot failure it can also be a credentials issue are you sure the ESX access is correct?
05-07-2012 07:06 AM
Also it will be good to know if you are using the Query option to get your VM's or if you are manualy adding each VM, try nbdiscover -noxmlouput -policy <policy> -noreason, run this from the Backup Host or Discovery Host.
05-07-2012 10:23 PM
Hi Omar,
here is the output:
C:\Windows\system32>bpplinfo FSGE-VMware-W2k8 -U -v
<2>bpplinfo: INITIATING: version NetBackup 7.0 created: 0
Policy Type: FlashBackup-Windows
Active: yes
Effective: 11/16/2010 11:52:12
Follow NFS Mounts: no
Cross Mount Points: no
Client Compress: no
Collect TIR info: no
Policy Priority: 0
Ext Security Info: no
File Restore Raw: yes
Client Encrypt: no
Residence: backupsrv1-hcart-robot-tld-0
Volume Pool: NetBackup
Server Group: *ANY*
Data Classification: -
Residence is storage lifecycle policy: no
Granular Restore: no
Ignore Client Direct: no
<2>bpplinfo: EXIT status = 0
05-07-2012 10:31 PM
I don't have this ulility on my server.
05-08-2012 07:45 AM
NetBackup 7.0 GA had loads of 'VMware' bugs recommend if you are on 7.0 to update to latest maintenance pack for that release.
05-09-2012 07:52 AM
Check the following:
1. That the vm backup host is a Windows server
2. That the vm in question is not a template
3. That the vm in question has all of its VMDK's on the SAN luns and not on local disk
4. That the vm has vmware tools installed and up to date
Also run the bpplinfo command with -L switch rather than the -U and show us the output
Thanks
05-09-2012 06:01 PM
1. Windows 2k8 r2
2. its not a template
3. the vmdk file is fosted on a LUN connected via iSCSI.
4. Tools are uptodate
<2>bpplinfo: INITIATING: version NetBackup 7.0 created: 0
Policy Type: FlashBackup-Windows (29)
Active: yes
Effective: 11/16/2010 11:52:12
Follow NFS Mounts: no
Cross Mount Points: no
Client Compress: no
Collect TIR info: no
Policy Priority: 0
Ext Security Info: no
File Restore Raw: yes
Client Encrypt: no
Max Jobs/Policy: 10
Mult. Data Stream: no
Block Level Incremental: no
Perform Snapshot Backup: yes
Snapshot Method: VMware
Snapshot Method Arguments: nameuse=0,Virtual_machine_backup=1,trantype=6,disable_quiesce=0,file_system_optimization=1,snapact=2,vmmono=0
Perform Offhost Backup: yes
Backup Copy: 0
Use Data Mover: no
Data Mover Type: 2
Use Alternate Client: no
Alternate Client Name: target
Use Virtual Machine: 1
Hyper-V Server: (none)
Enable Instant Recovery: no
Collect BMR Info: no
Max Frag Size: 0 MB
Checkpoint Restart: no
Residence: backupsrv-hcart-robot-tld-0
Volume Pool: NetBackup
Server Group: *ANY*
Data Classification: -
Residence is storage lifecycle policy: no
Granular Restore: no
Generation: 59
Ignore Client Direct: no
Exchange Source attributes: no
<2>bpplinfo: EXIT status = 0.
05-09-2012 07:53 PM
Hi Stuart,
I don't suppose you have a link to the maintenance packs?
05-10-2012 08:40 AM
Hi Nerdling,
whenever still interested, he is a link for version 7.1.0.4:
http://www.symantec.com/business/support/index?page=content&id=TECH181132
Regards
05-10-2012 08:45 AM
7.0.1 Update link on this page
http://www.symantec.com/business/support/index?page=content&id=TECH65429&key=15143
05-11-2012 05:05 AM
I cannot read the snapshot arguments section - could you show us a screen shot of the snapshot section please
05-11-2012 06:41 AM
OK some more thoughts:
install_path\NetBackup\logs\bpVMutil {contains messages on Policy configuration and on restore}
install_path\NetBackup\logs\nbproxy {{contains messages on Policy configuration}
05-13-2012 09:51 PM
Hi Guys,
I still plan to apply the maintenacne packs as suggested however I have been abe to run my backups...
I had to remove all the VM's from the policys then re added them (allowing NBU to discover them).
This seems to have resolved the problem. All the VM's have been rebooted recently due to a requirement to restart the Hosting SAN, this is the only possible casue of this problem I can think of.
Thanks for your help.