cancel
Showing results for 
Search instead for 
Did you mean: 

Solaris 10 not seeing SL24 Robot

ckrull
Not applicable

I apologize in advance.  I have scoured the message board and tried lots of things and I am not getting anywhere.

T5240 with a QLogic HBA direct attached to an SL24 Robot.

When I scan in NBU Admin console, the drive is seen, but as standalone.

Here is cfgadm output.

cfgadm -o show_FCP_dev -al

Ap_ID                   Type          Receptacle     Occupant     Condition
c2                      fc-private    connected      configured   unknown
c2::2002000e11120aaa,0  tape          connected      configured   unknown
c2::2002000e11120aaa,1  med-changer   connected      configured   unknown

sg.conf shows lun 0 and lun 1 on c2.

sg.conf

***snipped***
name="sg" parent="fp" target=0 lun=0 fc-port-wwn="2002000e11120aaa";
name="sg" parent="fp" target=0 lun=1 fc-port-wwn="2002000e11120aaa";

/dev/sg has 2 devices.

I have rebuilt sg drivers several times.  I have configured sgen.conf to try to see the changer with no luck.

We lost our previous configuration with a hardware failure, and there is a chance the library is non-functional, which is part of what we are trying to figure out.

Any help is greatly appreciated.

 

1 REPLY 1

pats_729
Level 6
Employee

Hi Ckrull,

This article helped me to fix sg rebuild issues most of times. Worth trying it, if not already followed/implemented.

https://www.veritas.com/support/en_US/article.000026876