10-18-2013 12:53 AM
Hi!
I have a issue with nbperfchk. My write test was successfull. I used the command nbperfchk -i zero: -o T:\test -s 80g -syncend.
Now I want to do the read test and use the command: nbperfchk -i T:\test -bs 1M -o NUL.
All i get in the console are the following lines:
9 MB @ 0.0 MB/sec, 0 MB @ 0.0 MB/sec, at 1382082483.
The last number counts up every line by 3, the rest stays the same. for over 2 hours now.
Am I doing something wrong or is there a hardware/software issue?
Thanks for your help
Solved! Go to Solution.
08-07-2014 04:02 PM
Just found that nbperfchk was having this issue back in 7.5.0.6 & 7.6.0.1, from what I know it is fixed in 7.5.0.7 & 7.6.0.2.
10-19-2013 12:52 AM
Try with this:
nbperfchk -i T:\test -bs 1024k -o NUL
10-20-2013 09:39 PM
i have tried it now... this is what i get
10-22-2013 02:07 PM
Strange..
I believe your command prompt is "run as administrator", isn't it?
What if you just try with C:\somefile.txt (assume somefile.txt exists in C:\) ?
Might want to check with Symantec support...
10-23-2013 05:48 PM
Hi Bublebeeman85,
Sorry, I'm editing my earlier comment. But essentially you can try experimenting with different buffer size value, e.g. 4096k.
Cheers,
Wiriadi
02-18-2014 12:44 AM
Hello,
i have the same issue. Did you find a resolution ?
08-07-2014 04:02 PM
Just found that nbperfchk was having this issue back in 7.5.0.6 & 7.6.0.1, from what I know it is fixed in 7.5.0.7 & 7.6.0.2.
08-07-2014 04:57 PM
thanks for the update watsons