09-01-2010 04:38 PM
Solved! Go to Solution.
10-06-2010 03:23 PM
Correct. If all the media servers have the correct license keys installed (Server, Library based tape drives, Shared Storage Option) the wizard will scan all media servers, detect the same tape drives on the media servers and configure them as shared.
09-01-2010 07:23 PM
09-01-2010 08:47 PM
Upgrade of the all netbackup module (master & media)
and move the media db in media server
So, delete the all device.
and device reconfigration at upgrade after.
not mixed netbackup version ...
upgrade step is not failed and not problem.
09-01-2010 10:13 PM
09-02-2010 12:51 AM
Before the upgrade step....
In media server (media db) move to master
below the command
#> bpmedia -movedb media_id -oldserver media -newserver master
and media server list clear(delete the drive, robot) and new install(6.5MP6)
Upgrade only master server and "nbpushdata" is well done.
So, restore the media ownership at each media server.
I guess... Definitely, upgrade step is not problem....
09-02-2010 01:17 PM
doing the bpmedia -movedb - just moved who owned the tapes.
As Marianne asked did you do the nbpushdata on each media server after?
Did you upgrade the media servers?
09-02-2010 10:09 PM
09-03-2010 12:43 AM
Below the upgrade procedure
1. check the available capacity (volume) / delete the log files
(daemon stop and compress the existing module using the "tar" command)
2. move the media db at master server
(bpmedia -movedb -m <media_id> -newserver <master server> -oldserver <media server>)
3. delete the tape device configuration (all server)
(tpconfig -multiple_delete -drive 0:1:2:3:4:5:6:7:8:9:X and tpconfig -multiple_delete -robot 0:1:2:3:4:5:X)
4. upgrade the master server (delete the media server list at bp.conf)
5. updating catalog DB
(/usr/openv/netbackup/bin/nbpushdata -add)
6. Install the media server
(delete the media module and new install the 6.5.6)
7. Verify the catalog data
(check the catalog data using the bpmedialist, bpimagelist and show the java console)
8. configure the ovpass and backup drive (master & media)
(using the tpconfig command)
9. check the communicate media server and check the drive status
(nbemmcmd -getemmserver and vmoprcmd)
10. restore the media owner
(bpmedia -movedb -m <media_id> -newserver <each media server> -oldserver <master server>)
11. backup test
Is this procedure problem ?
09-03-2010 01:47 AM
09-05-2010 05:09 PM
09-05-2010 10:09 PM
10-06-2010 12:45 PM
Hi Marianne,
I was reading your post. If drives are all delete and the wizard, will it automatically configure the drives sa shared in a sso enviroment?
10-06-2010 03:23 PM
Correct. If all the media servers have the correct license keys installed (Server, Library based tape drives, Shared Storage Option) the wizard will scan all media servers, detect the same tape drives on the media servers and configure them as shared.