09-18-2015 03:22 AM
HI all,
I need some suggestion, on host Hyper-v I have a lot of VM and the backup of all those VM work fine.
Only one backup end in status job 48. I try ping and nslookup from Master and Media and it is all ok, also the reverse lookup is ok.
I read this:
The problem may be one of the following:
•The NetBackup master server cannot communicate with the virtual machine.
•The host name of the virtual machine is not available.
The NetBackup job details log contains the following message:
Error bpbrm(pid=8072) Nameuse [0], VM [<vm name>]
not found on any node. Is either powered off or does
not exist.
The virtual machine is either not running, or it is booting up. Make sure that the virtual machine is running and then rerun the backup.
but the VM is up and running.
Master Server:
OS windows server 2012 Standard
NBU version
HARDWARE Windows x64
VERSION NetBackup 7.6.0.4
RELEASEDATE Fri Oct 24 21:13:39 2014
BUILDNUMBER 20141024
Host Hyper-v:
OS windows server 2012 R2 Datacenter
HARDWARE Windows x64
VERSION NetBackup 7.6.0.1
RELEASEDATE Wed Nov 13 14:31:30 2013
BUILDNUMBER 20131113
VM:
OS windows server 2012 R2 Standars
09-18-2015 03:38 AM
09-18-2015 04:54 AM
Hi Marianne,
NBU side
and Win side
I attacched the report job detail
09-18-2015 04:58 AM
Is the HyperV in a cluster? Do you have client on all nodes, and using cluster hyperv as host?
09-18-2015 05:03 AM
If I remember correctly there was a similar issue on vmware, if the hostname and the displayname was not the same.
The bpresolver log probably contain clues to what the problem is.
The only other thing I can think of is the Hyper-V integration service not properly installed on this VM and running online backup.
EDIT
Is the DNS domain for this VM a search domain on the backup host(s) ?
09-18-2015 06:11 AM
Hello Riaan,
yes the hyper-v is in a cluster and yes I installed NBU client on all nodes and in the policy I use cluster hyperv host.
09-18-2015 06:51 AM
Hi Michael,
I created /usr/openv/netbackup/logs/bpresolver on client (host) on master and on Media, I run newly the policy but the log folder remains empty.
"The only other thing I can think of is the Hyper-V integration service not properly installed on this VM and running online backup."
I do not installed the client directly on VM, but I installaed the client on the Host Hyper-v.
09-18-2015 06:52 AM
See if there is anything in install_path\NetBackup\logs\bpVMutil logs that will tell you what's happening. Logs should be on the client (all hyperv hosts, but probably the one that has the cluster ip active)
09-18-2015 07:27 AM
I created bpVMutil on the client, I attach the log, but I think that we do not help us.
09-18-2015 07:57 AM
Is your VM listed in
C:\Program Files\VERITAS\NetBackup\online_util\fi_cntl\vcbnames_hyperv_Any
09-18-2015 09:37 AM
This not the Netbackup client, but an integration between the hyper-v host's and the VM's vss systems, which is need for online backup.
09-21-2015 01:46 AM
hellp Riaan,
I searched in Master Server but there is not a file named \vcbnames_hyperv_Any
I make some mistakes ??
tks very much
09-21-2015 01:55 AM
Hi,
It would probably be on the media server (or maybe the hyperv parent).
09-21-2015 02:43 AM
nothing, I searched in Media:
xxxnbu03:/usr/openv/netbackup/online_util/fi_cntl # ls -l | grep vcb
xxxnbu03:/usr/openv/netbackup/online_util/fi_cntl #
in host Hyper-v:
.... if you have any idea/test/suggestions the backup fails again in 48.
tks!!
09-21-2015 02:51 AM
nothing, I searched on Media and in host Hyper-v.
if you have any idea/test/suggestions the backup fails again in 48.
09-21-2015 03:03 AM
Can you put this vm in a job by itself and then run it. We'll review the logs and see what is going on.
09-21-2015 03:22 AM
on the VM there is not installed NBU client. I Installed the NBU client in Host Hyper-v, I mean I can launch the single Manual backup of this machine when I want.
Please show me all logs necessary for a good troubleshooting.
If you think that it is better open a case I can do it.
thank you for your support.
09-21-2015 05:35 AM
Just copy the hyper-v to new one and then only select the client you want.
09-23-2015 02:32 AM
hello Riaan,
sorry for delay but I was very busy, I do not understand because I must copy the Hyper-v in a new policy and I do not can run single job with existing policy, anyway I have created a new policy and I run job backup, which logs do you want ?
thank you, very much
09-23-2015 02:53 AM
hallo,
I have some news....
The VM is up and running but I tried to do a new discovery and the VM do not appear int the VM list:
I ask support to the OS windows specialist...