03-17-2014 01:51 AM
Morning all,
I need some assistance with an issue I found this mornign on one of my VM's.
The backup is failing with the error code 6. backup server is 2008 R2 Standard 64bit.
Below is the error message on the backup:
Solved! Go to Solution.
03-17-2014 05:34 AM
Hi All,
Thank you for the prompt feedback. It seems the issue was that LUN's were not presented on the server. I've got the Storage Team currently looking into this. I actually saw this on one of the previous posts.
It seems like LUN’s are not presented on server clientname or user “backupuser\_svc_vcenter” does not have access to LUN
I've got the teams lokoing into this currently.
03-17-2014 01:52 AM
Further more, Netbackup version is 7.5.0.6
03-17-2014 02:11 AM
Hi
Please answer the following questions and try the following points for analysis:
03-17-2014 05:34 AM
Hi All,
Thank you for the prompt feedback. It seems the issue was that LUN's were not presented on the server. I've got the Storage Team currently looking into this. I actually saw this on one of the previous posts.
It seems like LUN’s are not presented on server clientname or user “backupuser\_svc_vcenter” does not have access to LUN
I've got the teams lokoing into this currently.
03-19-2014 01:00 AM
HI Baleka
This is mostlikely the case if you're using SAN as a backup transfer method. In the mean while you should be able to back it up using nbsl while they sort out the san. This will take a lot longer and will use the vKernel port for the transfer.
Please remember to mark a solution once you found the problem.