I have one NBU advandisk 1advol that not mounting on the system (verify from NBU appliance). Below is the entry from /etc/fstab.
/dev/vx/dsk/nbuapp/pdvol /disk vxfs _netdev,nodev 0 0 /dev/vx/dsk/nbuapp/catvol /cat vxfs _netdev,nodev 0 0 /dev/vx/dsk/nbuapp/advol /advdisk vxfs _netdev,nodev 0 0 /dev/vx/dsk/nbuapp/cfgvol /config vxfs _netdev,nodev 0 0 /dev/vx/dsk/nbuapp/1advol /advanceddisk/dp1/1advol vxfs _netdev,nodev 0 0
During appliance reboot, I notify that there is warning to run fsck to the 1advol.
Can i proceed with the fsck on the targeted fs? What is the impact if fsck happen to be unsuccessful? , since i can see the 1advol storage utilization showing correct size and data usage from NBU appliance Web Console.
Appreciate if you guys can advise me on this situation.
Btw, I just ventured in Veritas technology and looking forward to learn more on this.
Thank you in advance!
Solved! Go to Solution.
Further checking found this :-
- [Info] Performing sanity check on disks and partitions... (5 mins approx) - [Warning] The 'AdvancedDisk' partition '1' is not mounted... - [Info] Mounting the 'AdvancedDisk' partition '1'... - [Error] Failed to mount the 'AdvancedDisk' partition '1'. A full file system check (fsck) needs to be performed on this partition. - [Error] Failed to connect to server smtp.gmail.com.
I believe this is the issue that im facing at moment. should i proceed with fsck, or is there any way to fix this?
Appreciate for any advise.
the vxfs file systems is rather mature & stable, so likely it is not that bad.
If if the file system is broken beyond repair, the data on the file system is luckily backup data and not orginal data.