03-16-2015 01:42 PM
Hello People,
I need a little help.
For I create VxMS log I need create the VXMS folder and the register on regedit, ok?!
But I need create this two things in Media server of VMWARE or direct in client that have a failure?
Very thanks.
Solved! Go to Solution.
03-16-2015 02:33 PM
What is your Netbackup version & OS?
In different version, the way of enabling VxMS logs are a bit different, please refer to:
http://www.symantec.com/docs/TECH77790
It also contains info of where logs should be enabled.
03-16-2015 02:35 PM
On the proxy / backup host server not the client.
http://www.symantec.com/business/support/index?page=content&id=TECH77790
How you set the logs also changed at 7.6
http://www.symantec.com/docs/HOWTO70905
03-16-2015 02:33 PM
What is your Netbackup version & OS?
In different version, the way of enabling VxMS logs are a bit different, please refer to:
http://www.symantec.com/docs/TECH77790
It also contains info of where logs should be enabled.
03-16-2015 02:35 PM
On the proxy / backup host server not the client.
http://www.symantec.com/business/support/index?page=content&id=TECH77790
How you set the logs also changed at 7.6
http://www.symantec.com/docs/HOWTO70905
03-17-2015 07:13 AM
Ok,
In this case, backup host server is the media server who has installed the VmWARE software and the clients are the server over vmware. So I need enable this logging in media server?
Best Regards,
03-18-2015 03:29 PM
Yes