cancel
Showing results for 
Search instead for 
Did you mean: 

Warning] V-126-73 - Error while trying to do a prepare to restore on Dell R410 with PERC S100

gumbolsu
Level 2

I am getting the following error while trying to do a prepare to restore:

 

 

 

 

 

 

 

My server is running Veritas Netbackup 6.5.6 on a  32bit Windows 2003 Standard w/SP2. The server I am trying to restore is a DELL 410 with a PERC S100 S300 raid controller, running windows server 2003 (32bit) standard.  Thanks in advance for your assistance.

1 ACCEPTED SOLUTION

Accepted Solutions

gumbolsu
Level 2

As it turns out the WinPE 1.6 version used by BMR on 6.5.X releases is based on Windows 2003 SP1.  There is not BMR method to update the OS to SP2.  Making use of your 7.1 server removes this problem as it is using WinPE 2.1, based on  Windows 2008. The PERC S100 raid controller does not support WinPE 1.6 with SP1.

 

http://support.dell.com/support/systemsinfo/document.aspx?c=us&cs=555&l=en&s=slg&~file=/storage/stor...

View solution in original post

2 REPLIES 2

gumbolsu
Level 2

I have verified with DELL that this server only has a standard IDRAC card without any virtual media and I am getting the following error.  This is after I manually load the driver (F6) during the boot up to the restore media.

 

gumbolsu
Level 2

As it turns out the WinPE 1.6 version used by BMR on 6.5.X releases is based on Windows 2003 SP1.  There is not BMR method to update the OS to SP2.  Making use of your 7.1 server removes this problem as it is using WinPE 2.1, based on  Windows 2008. The PERC S100 raid controller does not support WinPE 1.6 with SP1.

 

http://support.dell.com/support/systemsinfo/document.aspx?c=us&cs=555&l=en&s=slg&~file=/storage/stor...