cancel
Showing results for 
Search instead for 
Did you mean: 
NetBackup

Discussion Posts

Subscribe to NBU notifications

In case you are not aware - you can subscribe to NBU notifications over here: https://sort.veritas.com/spec_doc Hopefully NBU 9 will be added to the list soon.

Marianne by Moderator
Partner    VIP    Accredited Certified
  • 5022 Views
  • 1 replies
  • 17 kudos

Resolved! error with status 59

Hi all, After long time working on case related to replication and restore from production site to DR and from DR to Production,the issue was solved partially: 1.the SLP was configured on both sides with the same name. 2.in the productin was configur...

Rami_Nasser1 by Level 6
Partner Accredited Certified
  • 998 Views
  • 11 replies
  • 1 kudos

Resolved! nbucode 129 - basic DSSU filling up

I have a master/media server with 2 DSSUs each on the same big disk/volume but different paths (E:\diffs and E:\fulls). 7.1.0.3 is the version. both DSSUs are set for HWM 90% and LWM 0% so that they evacuate completely each time the dup runs to the t...

Resolved! Need to backup a virtual client with millions of small files

We are running NetBackup 6.5.6 (soon to upgrade to 7.1.0.3) on a Solaris 10 master with RH Linux media servers. One of the backup clients is a windows 2003 vm, where we have the NB client running on the guest system. This particular client has approx...

LT2000 by Level 4
  • 758 Views
  • 5 replies
  • 2 kudos

Resolved! Upgrade from Netbackup 6.5.4 to Netbackup 7.5

Hello, Currently I am upgrading from version 6.5.4 to 7.5 on a Windows 2008 R2 server.  I am upgrading because 6.5.4 is not compatible with Server 2008 R2.  I have a few questions: 1.  Can I perform a straight upgrade from 6.5.4 to version 7.5 or wil...

Resolved! Status 6 On Flash Windows Policy Backup after Upgrade 7.5.0.3

Hello People: I Upgrade to 7.5.0.3 from 7.1 today and I receive the following status message on the Flash Windows Policy Backup: 8/27/2012 1:22:50 PM - Info nbjm(pid=10100) starting backup job (jobid=346744) for client CLIENT_NAME, policy TEST-Virtua...

HEMANPR by Level 6
  • 586 Views
  • 8 replies
  • 0 kudos

Resolved! query

  If NetBackup encounters a backup policy with two schedules (one full, one incremental) that are each due to run, are each within their defined time window, and are each configured with the same frequency value, the schedule that is alphabetically f...

Resolved! NetBackup Timeouts

Out NetBackup jobs fail when there is a WAN disconnection (usually due to ISP issue).  Media and client servers are in one office and across the WAN is the master server.  We have increased timeouts for all servers involved (and ensured their setting...

Resolved! Using tape Drive in Net Backup and also for Solaris Tape Backup's

Can i use a tape Drive under netbackup control to backup some data using Solaris OS level backup to tape. Backup Media Server is Solaris 10 Media Server. Host running the backup is also the same Solaris 10 Server. I am receiving drive in use error af...

vamsivaddi by Level 5
Partner Accredited Certified
  • 344 Views
  • 5 replies
  • 0 kudos

Netbackup 7.5 vmware backup SAN transport and slow backup speed

I am doing VMware backup policy using a media server dedu pool(the disk LUN is on the 4G FC SAN). The datastore is on the FC SAN. I am getting the backup rate from anywhere 8Mbps to almost 100Mbps. I check the resouce monitor for both the media serve...

Henry_Cheng by Level 3
Partner Accredited
  • 1562 Views
  • 8 replies
  • 0 kudos

Resolved! BPTM COMMAND USAGE

Hi All, Can any body explain field POOLNUM in the below command what exactly i wanna give there if i run that command?   bptm -makedbentry -m A00001 -den hcart -poolnum 1   Thanks Nayab

Restore of SQL Database to another machine

Hi, Can anyone advise the steps on restoring SQL Db on another host/machine via NBU 7.x? Would there be any script to be created upon restore on the destination server, etc.? Thanks,

Resolved! vmoprcmd

  2. What does (from master server) this output show? # vmoprcmd -hoststatus -h <mediaserverwithtapedriveproblem> Cant i login on the media server and run vmoprcmd?    

Resolved! change retention on Duplicated data

Hello Experts,   We use vault for duplicaing data from diskpool to tape library. By default retention for duplicated data remains as that of original data.   Please educate on me how can we change retention only on duplicated data ?     Thanks, Bhara...

Resolved! sudo ./bpstart_notify.lx245-PNBV

  bash-3.00$ sudo ./bpstart_notify.lx245-PNBV Password: bash-3.00$ pwd /usr/openv/netbackup/bin bash-3.00$   lx245-PNBV  :This is the policy name I run the above script and getting no error when i run the command.What does this eans?

Resolved! NBU status: 800

Hi, I did the Re label task but a have received errors on some of the tapes as the below… ==================================================================================== 26/August/2012 11:39:57 AM - begin Label 26/August/2012 11:39:57 AM - start...

Resolved! Tape Library Configuration

Hi All,   Please help me with configuring tape library as we have QUANTUM SCALAR i80 library when i am trying to click on configure devices i am getting the below error. Please guide me.   Thanks, Nayab