cancel
Showing results for 
Search instead for 
Did you mean: 
NetBackup

Discussion Posts

Subscribe to NBU notifications

In case you are not aware - you can subscribe to NBU notifications over here: https://sort.veritas.com/spec_doc Hopefully NBU 9 will be added to the list soon.

Marianne by Moderator
Partner    VIP    Accredited Certified
  • 4861 Views
  • 1 replies
  • 17 kudos

Resolved! Inventory too long

My inventory is taking longer than normal, some day before it was taking about seconds, but now it´s taking 13 minutes to finish. Can anybody help me? Thanks.

Migration from solaris to linux

Hi I migrate from soalris to linux. I zoned  required drives for new server. But i am not seeing robot on new server. Do i need to zone robot as well with new server. So far i want to see the robot on both server once new server function properly i w...

Resolved! ESL G3 - Netbackup

Hi guys, Need your help and knowledge with a HP ESL G3 and Netbackup 7.5.0.6 on Solaris configuration On the ESL G3 a partition was created for Netbackup Master Server, also a zone in the SAN was created, on the Netbackup Master server box I just see...

omar_iturbe1 by Level 3
Partner Accredited Certified
  • 763 Views
  • 4 replies
  • 1 kudos

VM display name that made nbpem crash with status 50

We have experienced that a VM name could get nbpem to crash Netbackup 7.5.0.5 on Windows 2008 R2 SP1 The problematic VM display name was DK01SV0599 - Do not start After renaming to DK01SV0599-Do_not_start the backup works without issues We never figu...

Resolved! Error 830

*** Moved to new discussion from https://www-secure.symantec.com/connect/forums/error-830-all-compatible-drive-paths-are-down-media-available-console-everything-green  by MvdB *** i also have the same issue but it is consistent and as such almost non...

Oracle restore with symbolic links defective

When restoring symbolic links from a source to a target system the symbolic links will be renamed. The symbolic link / oracle/a/11203/sapbackup that points to / oracle/a/sapbackup is not renamed during restore on the system b. The remaining sites lin...

Daniel_Be_ by Level 4
Partner Accredited
  • 278 Views
  • 2 replies
  • 1 kudos

6 + Vnetd process running while backup triggered

Hi Team, While running a backup for one of my solaris client 6+vnetd process are running ,Its effecting the CPU utilization even we have disabled the multistreamming for the server   please give me solution for that

Resolved! nbu 7.5 win 2008..client solaris backup failing with error 9

22.09.2013 23:08:17 - Info nbjm(pid=7072) starting backup job (jobid=90661) for client UBA1P02C00DBV0S.mgmt.local, policy UBA1_Solaris, schedule Full_Wednesday  22.09.2013 23:08:17 - Info nbjm(pid=7072) requesting STANDARD_RESOURCE resources from RB...

Resolved! Install License

Hi, I have below system: 1 dedicated master server, no tape drive attached. 2 media servers physical lun attached to 10 drives each I have licenses : Ent Server, STD Client, Client App/DB and Tape Drive Should I install licenses like this? Inst...

iaw by Level 5
  • 480 Views
  • 4 replies
  • 0 kudos

Resolved! Issue in installation of netbackup client 7.5 on windows client

Hi All I am installing NBU 7.5 on windows client (WINODW 2003, SP2, 32 bit system), earlier NBU 7.1.0.4 was installed on it. When I am installing client software on it, in "INSTALLATION TYPE", I am only getting " Install to multiple computers in your...

NBU35 by Level 6
  • 447 Views
  • 7 replies
  • 0 kudos

Resolved! Merge 2 volume on netbackup Master Disk Pool

Hi all I trie to append new disk on a disk pool. My disk pool are actuelly on Puredisk volume (D:\netbackup), but when i want add a new volume (E:\netbackup) i have an illegal operation When i want select volume on disk pool configuration my new wind...

Olivier30 by Level 4
Partner
  • 1092 Views
  • 8 replies
  • 1 kudos

Resolved! When we will get like this errors

SR Serial Number: A0C0180425 SR Problem Summary: T036 - Drive Tape Alert 6 - Write Failure SR Error Code: 36 SR Severity: High Fault code generic :0 Fault code specific :11 Element type generic:UDS-3 Media Element Location :[0,1] Tape Drive Ser...

madhuri by Level 4
  • 593 Views
  • 5 replies
  • 0 kudos

Resolved! Media server drives down

Hello Team, Last week we have power outage on one location. In that we are running of netbackup with 1 media server. After the power outage the drives connected to Master server were UP and working fine.. But the drives connected to the media servers...

Vamsi1 by Level 5
  • 265 Views
  • 4 replies
  • 0 kudos

Resolved! Problem to update NBU configs after replacing a robotic tape drive.

Last week, the IBM stuff replaced a tape drive for the IBM 3584 tape library, and it was recognized on OS-level, I did not realize that there should be some steps to update the NBU config, I just restarted the netbackup processes on Master server and...

zhangchao by Level 3
Partner Accredited Certified
  • 698 Views
  • 3 replies
  • 0 kudos

Resolved! Virtual Tape Library Robot not detected by Netbackup

Need help. Background: We manage a Netbackup Master server which has several media servers. The media servers are at different locations and backup to a Virtual tape Library and then duplicate to a standalone tape drive. Problem: This was working f...

mtimbol by Level 3
Certified
  • 2606 Views
  • 5 replies
  • 0 kudos

Resolved! media with fewer mounts

Hi Marrianne, . I was reading this technote.   NBU 7.5   https://www-secure.symantec.com/connect/forums/how-netbackup-chooses-media-complete-list   What was the final conclusion for this

Resolved! reclaiming used space

NBU 7.5.0.5 our daily and weekly backup policies are to pd then to tapes. monthly goes directly to tapes and ejected. how can i reclaim the space used (in the hard disk) by the daily and weekly policies since their retention period has already passed...

manatee by Level 6
  • 631 Views
  • 5 replies
  • 1 kudos

Resolved! command to make a media a primary copy

Hi Champs, I have my copy 2 images on a single tape.My primary tape is missing.   Is there any command by which I can make this media a primary copy?I have all images on this single media which are copy 2. Set primary copy is the option.and ALT_RESTO...