cancel
Showing results for 
Search instead for 
Did you mean: 
NetBackup

Discussion Posts

Subscribe to NBU notifications

In case you are not aware - you can subscribe to NBU notifications over here: https://sort.veritas.com/spec_doc Hopefully NBU 9 will be added to the list soon.

Marianne by Moderator
Partner    VIP    Accredited Certified
  • 5022 Views
  • 1 replies
  • 17 kudos

Resolved! Correct binary for the solaris machine

HI All,   I have downladed the 7.5 client binaries from support fileconnect  NB_CLT_7.5.0.5_tar-split.1of3 NB_CLT_7.5.0.5_tar-split.2of3 NB_CLT_7.5.0.5_tar-split.3of3   I mearge it and NB_CLT_7.5.0.5.tar it become and size is 3.64 GB. JUst need infor...

Job status

Dear all, A newbie question. I'm going to initiate a mannual back for a few clients before they get decommisioned. Once executed i like to know the status of the job (Ideally if they have finished successfully) with some information as to when it was...

OSP by Level 2
  • 328 Views
  • 2 replies
  • 2 kudos

catalog backup fails ,error code 1

Hi All catalog backup fails with error code 1 GUI error , file list : CATALOG_DRIVEN_BACKUP 05/28/2013 16:00:00 - Info bpdbm (pid=23510) staging relational database files for catalog backup 05/28/2013 16:00:00 - Info bpdbm (pid=23510) staging NBAZDB ...

rookie11 by Moderator
   VIP   
  • 811 Views
  • 2 replies
  • 1 kudos

pbx port not communicating

Hi folks client server linux 7.1.0.2, master+media linux 7.1.0.2 .they can ping each other, telnet client 13782, telnet client 13724 works fine. but telnet client 1556 fails.  port is swtiched OFF then ON several times. we cannot reboot this server d...

rookie11 by Moderator
   VIP   
  • 370 Views
  • 3 replies
  • 0 kudos

Resolved! Error code 90

Hi folks NBU client server 7.1.0.2  four drives C, D, E ,F. C D F being backedup under MS windows policy name POLICY1 , backup selection ALL_LOCAL_DRIVES, mutistreaming is ON, E:\ excluded from using exclude list, It is updated in windows registry. E...

rookie11 by Moderator
   VIP   
  • 1419 Views
  • 2 replies
  • 1 kudos

Resolved! Migrating off a Master server

Would like to see if anyone can recommend some best practices when migrating off a Master server with an older catalog?  Moving from HP-UX 11.11 version 1 running NBKUP 6.5.6 to SuSE x86.  We will be keeping the same host names, library connections(f...

BostonM by Level 2
  • 274 Views
  • 2 replies
  • 0 kudos

Need confirmation of Exchange 2013 support

We are setting up a new NetBackup 7.5 master server and I need to get confirmation of support for Exchange 2013. I have seen articles suggesting that there is no support and not even any plans for support at this time, even though Exchange 2010 is su...

Resolved! Netbackup for MS SQL -- Backup Archive & Restore

    Hello Everybody!! Does anybody knows why netbackups for Microsoft SQL Server 2008 backup jobs ends with status 0 at the Netbackup console. When I try to restore a bakup it apears with a red icon, what does it mean? Are the backups consistency? I ...

Resolved! Netbackup 6.0 MP4 - Alert 800 All available drives are down

Hi, I use NB 6.0MP4 in conjuction with a Dell PV132T tape library (with two tape drives). Even so often the drives, either 1 or both, would go into a down state resulting in error 800. This may occur if a tape fails to eject or gets stuck in the pick...

Resolved! Calendar Schedule resetting the selected days

I've a backup policy that makes use of the Calendar Schedule feature of NetBackup 7.0, running on RHEL 5.2. The schedule is set to run only on the last day of the month. However, everytime I check the policy a few days later, I noted the schedule rev...

Yusoff by Level 3
  • 823 Views
  • 10 replies
  • 0 kudos

Unable to see Tape Drives on RHEL6

Hi, I have 2 servers (HPUX and Redhat) connected to 2 partitions on a Quantum i2000, the HPUX has 12 tape drives attached and Redhat (6) has 4. I moved 2 of the tapes drives from Partiton1 (HPUX) to Partition2 (Redhat) which was successful and I can ...

Resolved! Netbackup and HDS Shadow Image queries

Hi, We are using Hiitachi Shadow Image as replicatiion from Primary vol to Secondary vol in a Solaris server and mount the sec vol to Symantec Netbackup media server to perform full backup after syncronization completes.  We would like to find ...

YC by Level 4
  • 321 Views
  • 2 replies
  • 1 kudos

What does it mean about Netbackup robot?

Hi, Professional. I wonder about that NBU show some robot disable, Have anyone know about it and please explain to me? My environment, I use veritas cluster to create Netbackup service group and I found some robot was disabled but ths first, I would ...

Resolved! To configure tape drive.

Hi All, We have SL8500 tape library in our infrastructure and one of the drive had to be replaced due to hardware issues, we use NBU 7.1.0.4 in our environment. After replacing the drive the drive is fine at ACSLS level but in NBu it still shows the ...

Bshet by Level 3
Partner Certified
  • 3180 Views
  • 5 replies
  • 2 kudos

Resolved! upgrade Netbackup Master Server from 7.1.0.4 to 7.5.0.5

Hello !   I upgradead successful the Netbackup software to 7.5.0.5 using NetBackup_75_Upgrade_Guide.pdf .   I counted about 300k images on my Master Server before upgrade, now it seems that the first image migration step is too long: it is not ended....

cimo by Level 4
  • 330 Views
  • 6 replies
  • 0 kudos

Resolved! Mannual Tape cartridge management

Hi, We are lookinig at a follwing situation :- SCENARIO - with NBU 7.5 ======== 1. Based upon policy (frequency & retention and original size) about 250 nos. tapes are needed. 2. This results in large Tape library (robotic), to hold and manage all th...

mohanl by Level 3
Partner
  • 811 Views
  • 5 replies
  • 0 kudos

Resolved! LTO5 tape drive using mixed barecode labels with NetBackup

Hi   We are using NetBackup 7.5 writing to a LTO5 tape drive library. For the last year or so we used LTO3 barcode labels “000171L3” with LTO5 tapes and it worked 100%. In NetBackup it displayed as “Media type = HCART2” and “Volume Group = 001_00001_...

pieter_krige by Level 3
Partner Accredited Certified
  • 632 Views
  • 5 replies
  • 0 kudos

Configuration SAN Client and media SAN

Hello, My VTL is connected Directly on the media server by FC, and the media is also connected on the HP SAN swicth like the clients servers for making the Backup by SAN. I would like to know the process for do it ? The media is already installed and...

Resolved! Does NB7.1.0.4 support AIX6.1 TL8 SP2

Our OS Team are planning to upgrade AIX to technology level 8(TL8). It'll be helpful, if anyone clarify whether Netbackup supports AIX6.1 TL8 SP2 ? Thanks Paul Sam

SamPaul by Level 3
Certified
  • 240 Views
  • 3 replies
  • 0 kudos