cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 
Veritas.com
Support

cDot 8.3 Tape Drive Netbackup 7.7

Go to solution
Marcel123
Level 3

‎05-04-2016 02:16 PM

Hallo * ,

 

After my last 10 hours, i give up.

 

My personal backup nigthmare:

I should configure Netapp cDot 8.3.2 with Netbackup 7.7 over NDMP using OCUM and NBUPlugin and Backup to Tape using SSO Drive.

 

My Old Working Setup is:

- netbackup 7.7.2 Domain 1 Master 6 Media Servers

- Netapp 7Mode 4 Filers

- DFM / NBU Plugin for 7 mode

- Replication Director

-SSO between the filers and the tape drives.

My new not working Setup:

The Only one what i want to use is the SSO Tape Drive from the old config.

- netbackup 7.7.2 Domain 1 Master 6 Media Servers

- 2 cdot 8.3 Clusters(sto10/sto11) with  4 nodes

- TapeDrive should be only connected to 1 Node on sto10 (sto10-04) and sto11 (sto11-08)

- Ocum 6.4R1 with NBUPlugin 2.0.1 is working.

- Replication Director config is working.

- Backup to Tape not working.

 

My Problem:

I have read a lot of documents, the best is that:

http://www.veritas.com/docs/000025335

So if i configure all the stuff I can see the tape:

 

tpautoconf -probe sto11
Host "sto11" tape device model "Hewlett-Packard LTO-6":
  Device "/sto11-08/nrst0l" attributes=(0x4) RAW
    WORLD_WIDE_NAME=WWN[5:003:08c3a1:98d0b8]
    SERIAL_NUMBER=SN[F3A198D0B8]
    ELECTRICAL_NAME=defr1gfsssw31:1-26.126
    DENSITY=LTO-4/5 Native Density 
    ALIAS 0=st0
    AFFINITY=ab9fa319-0d3b-11e6-ba29-539a2d00d9ec
  Device "/sto11-08/nrst0m" attributes=(0x4) RAW
    WORLD_WIDE_NAME=WWN[5:003:08c3a1:98d0b8]
    SERIAL_NUMBER=SN[F3A198D0B8]
    ELECTRICAL_NAME=defr1gfsssw31:1-26.126
    DENSITY=LTO-4/5 Compressed     
    ALIAS 0=st0
    AFFINITY=ab9fa319-0d3b-11e6-ba29-539a2d00d9ec
  Device "/sto11-08/nrst0h" attributes=(0x4) RAW
    WORLD_WIDE_NAME=WWN[5:003:08c3a1:98d0b8]
    SERIAL_NUMBER=SN[F3A198D0B8]
    ELECTRICAL_NAME=defr1gfsssw31:1-26.126
    DENSITY=LTO-6 2.5TB            
    ALIAS 0=st0
    AFFINITY=ab9fa319-0d3b-11e6-ba29-539a2d00d9ec
  Device "/sto11-08/nrst0a" attributes=(0x4) RAW
    WORLD_WIDE_NAME=WWN[5:003:08c3a1:98d0b8]
    SERIAL_NUMBER=SN[F3A198D0B8]
    ELECTRICAL_NAME=defr1gfsssw31:1-26.126
    DENSITY=LTO-6 6.25TB Compressed
    ALIAS 0=st0
    AFFINITY=ab9fa319-0d3b-11e6-ba29-539a2d00d9ec
  Device "/sto11-08/rst0l" attributes=(0x5) REWIND RAW
    WORLD_WIDE_NAME=WWN[5:003:08c3a1:98d0b8]
    SERIAL_NUMBER=SN[F3A198D0B8]
    ELECTRICAL_NAME=defr1gfsssw31:1-26.126
    DENSITY=LTO-4/5 Native Density 
    ALIAS 0=st0
    AFFINITY=ab9fa319-0d3b-11e6-ba29-539a2d00d9ec
  Device "/sto11-08/rst0m" attributes=(0x5) REWIND RAW
    WORLD_WIDE_NAME=WWN[5:003:08c3a1:98d0b8]
    SERIAL_NUMBER=SN[F3A198D0B8]
    ELECTRICAL_NAME=defr1gfsssw31:1-26.126
    DENSITY=LTO-4/5 Compressed     
    ALIAS 0=st0
    AFFINITY=ab9fa319-0d3b-11e6-ba29-539a2d00d9ec
  Device "/sto11-08/rst0h" attributes=(0x5) REWIND RAW
    WORLD_WIDE_NAME=WWN[5:003:08c3a1:98d0b8]
    SERIAL_NUMBER=SN[F3A198D0B8]
    ELECTRICAL_NAME=defr1gfsssw31:1-26.126
    DENSITY=LTO-6 2.5TB            
    ALIAS 0=st0
    AFFINITY=ab9fa319-0d3b-11e6-ba29-539a2d00d9ec
  Device "/sto11-08/rst0a" attributes=(0x5) REWIND RAW
    WORLD_WIDE_NAME=WWN[5:003:08c3a1:98d0b8]
    SERIAL_NUMBER=SN[F3A198D0B8]
    ELECTRICAL_NAME=defr1gfsssw31:1-26.126
    DENSITY=LTO-6 6.25TB Compressed
    ALIAS 0=st0
    AFFINITY=ab9fa319-0d3b-11e6-ba29-539a2d00d9ec
  Device "/sto11-08/urst0l" attributes=(0x6) UNLOAD RAW
    WORLD_WIDE_NAME=WWN[5:003:08c3a1:98d0b8]
    SERIAL_NUMBER=SN[F3A198D0B8]
    ELECTRICAL_NAME=defr1gfsssw31:1-26.126
    DENSITY=LTO-4/5 Native Density 
    ALIAS 0=st0
    AFFINITY=ab9fa319-0d3b-11e6-ba29-539a2d00d9ec
  Device "/sto11-08/urst0m" attributes=(0x6) UNLOAD RAW
    WORLD_WIDE_NAME=WWN[5:003:08c3a1:98d0b8]
    SERIAL_NUMBER=SN[F3A198D0B8]
    ELECTRICAL_NAME=defr1gfsssw31:1-26.126
    DENSITY=LTO-4/5 Compressed     
    ALIAS 0=st0
    AFFINITY=ab9fa319-0d3b-11e6-ba29-539a2d00d9ec
  Device "/sto11-08/urst0h" attributes=(0x6) UNLOAD RAW
    WORLD_WIDE_NAME=WWN[5:003:08c3a1:98d0b8]
    SERIAL_NUMBER=SN[F3A198D0B8]
    ELECTRICAL_NAME=defr1gfsssw31:1-26.126
    DENSITY=LTO-6 2.5TB            
    ALIAS 0=st0
    AFFINITY=ab9fa319-0d3b-11e6-ba29-539a2d00d9ec
  Device "/sto11-08/urst0a" attributes=(0x6) UNLOAD RAW
    WORLD_WIDE_NAME=WWN[5:003:08c3a1:98d0b8]
    SERIAL_NUMBER=SN[F3A198D0B8]
    ELECTRICAL_NAME=defr1gfsssw31:1-26.126
    DENSITY=LTO-6 6.25TB Compressed
    ALIAS 0=st0
    AFFINITY=ab9fa319-0d3b-11e6-ba29-539a2d00d9ec
 

When i do a  device scan over the gui, they said no devices found on that NDMP Host.

So without device no Storage Unit. Without Storage Unit no Backup from Snapshot.

I have also the old Setup, that are connected to the same drive. The output is:

 tpautoconf -probe ftfp0002
Host "ftfp0002" tape device model "Hewlett-Packard LTO-6":
  Device "nrst1l" attributes=(0x4) RAW
    WORLD_WIDE_NAME=WWN[5:003:08c3a1:98d0b8]
    SERIAL_NUMBER=SN[F3A198D0B8]
    ELECTRICAL_NAME=defr1gfsssw31:1-26.126
    DENSITY=LTO-4/5 Native Density 
    ALIAS 0=st1
  Device "nrst1m" attributes=(0x4) RAW
    WORLD_WIDE_NAME=WWN[5:003:08c3a1:98d0b8]
    SERIAL_NUMBER=SN[F3A198D0B8]
    ELECTRICAL_NAME=defr1gfsssw31:1-26.126
    DENSITY=LTO-4/5 Compressed     
    ALIAS 0=st1
  Device "nrst1h" attributes=(0x4) RAW
    WORLD_WIDE_NAME=WWN[5:003:08c3a1:98d0b8]
    SERIAL_NUMBER=SN[F3A198D0B8]
    ELECTRICAL_NAME=defr1gfsssw31:1-26.126
    DENSITY=LTO-6 2.5TB            
    ALIAS 0=st1
  Device "nrst1a" attributes=(0x4) RAW
    WORLD_WIDE_NAME=WWN[5:003:08c3a1:98d0b8]
    SERIAL_NUMBER=SN[F3A198D0B8]
    ELECTRICAL_NAME=defr1gfsssw31:1-26.126
    DENSITY=LTO-6 6.25TB Compressed
    ALIAS 0=st1
  Device "rst1l" attributes=(0x5) REWIND RAW
    WORLD_WIDE_NAME=WWN[5:003:08c3a1:98d0b8]
    SERIAL_NUMBER=SN[F3A198D0B8]
    ELECTRICAL_NAME=defr1gfsssw31:1-26.126
    DENSITY=LTO-4/5 Native Density 
    ALIAS 0=st1
  Device "rst1m" attributes=(0x5) REWIND RAW
    WORLD_WIDE_NAME=WWN[5:003:08c3a1:98d0b8]
    SERIAL_NUMBER=SN[F3A198D0B8]
    ELECTRICAL_NAME=defr1gfsssw31:1-26.126
    DENSITY=LTO-4/5 Compressed     
    ALIAS 0=st1
  Device "rst1h" attributes=(0x5) REWIND RAW
    WORLD_WIDE_NAME=WWN[5:003:08c3a1:98d0b8]
    SERIAL_NUMBER=SN[F3A198D0B8]
    ELECTRICAL_NAME=defr1gfsssw31:1-26.126
    DENSITY=LTO-6 2.5TB            
    ALIAS 0=st1
  Device "rst1a" attributes=(0x5) REWIND RAW
    WORLD_WIDE_NAME=WWN[5:003:08c3a1:98d0b8]
    SERIAL_NUMBER=SN[F3A198D0B8]
    ELECTRICAL_NAME=defr1gfsssw31:1-26.126
    DENSITY=LTO-6 6.25TB Compressed
    ALIAS 0=st1
  Device "urst1l" attributes=(0x6) UNLOAD RAW
    WORLD_WIDE_NAME=WWN[5:003:08c3a1:98d0b8]
    SERIAL_NUMBER=SN[F3A198D0B8]
    ELECTRICAL_NAME=defr1gfsssw31:1-26.126
    DENSITY=LTO-4/5 Native Density 
    ALIAS 0=st1
  Device "urst1m" attributes=(0x6) UNLOAD RAW
    WORLD_WIDE_NAME=WWN[5:003:08c3a1:98d0b8]
    SERIAL_NUMBER=SN[F3A198D0B8]
    ELECTRICAL_NAME=defr1gfsssw31:1-26.126
    DENSITY=LTO-4/5 Compressed     
    ALIAS 0=st1
  Device "urst1h" attributes=(0x6) UNLOAD RAW
    WORLD_WIDE_NAME=WWN[5:003:08c3a1:98d0b8]
    SERIAL_NUMBER=SN[F3A198D0B8]
    ELECTRICAL_NAME=defr1gfsssw31:1-26.126
    DENSITY=LTO-6 2.5TB            
    ALIAS 0=st1
  Device "urst1a" attributes=(0x6) UNLOAD RAW
    WORLD_WIDE_NAME=WWN[5:003:08c3a1:98d0b8]
    SERIAL_NUMBER=SN[F3A198D0B8]
    ELECTRICAL_NAME=defr1gfsssw31:1-26.126
    DENSITY=LTO-6 6.25TB Compressed
   ALIAS 0=st1

 

 

Hopefully some can help me.

 

rg

marcel

 

 

0 Kudos
1 ACCEPTED SOLUTION

Accepted Solutions

Go to solution
mnolan
Level 6
Employee Accredited Certified

‎05-09-2016 12:06 PM

Give us a call and ask for 7.7.2 eeb 3869049

View solution in original post

0 Kudos
6 REPLIES 6

Go to solution
areznik
Level 5

‎05-06-2016 12:28 PM

You're not giving us any error, whats not working? 

0 Kudos

Go to solution
Marianne
Level 6
Partner    VIP    Accredited Certified

‎05-06-2016 10:12 PM

This is the issue: " When i do a device scan over the gui, they said no devices found on that NDMP Host. "

Handy NetBackup Links
0 Kudos

Go to solution
Marianne
Level 6
Partner    VIP    Accredited Certified

‎05-06-2016 10:25 PM

If you compare the device names in tpautoconf -probe output, you will see that on the cluster node it shows additional /sto11-08/ in device name. I don't know how to change this or how to 'convince' NBU to use these device paths. My guess is that there should be additional documentation for NBU and CDOT config. All I can suggest is to log a Support call with Veritas and request assistance from Backline engineer with NBU and NetApp cDot expertise.

Handy NetBackup Links
0 Kudos

Go to solution
mnolan
Level 6
Employee Accredited Certified

‎05-09-2016 12:06 PM

Give us a call and ask for 7.7.2 eeb 3869049

0 Kudos

Go to solution
Marcel123
Level 3

‎05-09-2016 12:54 PM

Hi,

nice to hear about i have already open a ticket. Also updated it now.

So i will check if someone has this in the shift.

Thanks for you help.

rg

marcel

0 Kudos

Go to solution
Marcel123
Level 3

‎05-10-2016 09:16 AM

Worked thanks a lot
0 Kudos