Highlighted

error code - 2001

I have seen the error code while taking the backup.

These problem I have faced only 2 of my Client Server while Backup.

From my end I have restart the client services but when i start the backup. With in 2 minute this Error Occured. Do needful.

1 Solution

Accepted Solutions
Highlighted
Accepted Solution!

  Problem does not seem to be

 

Problem does not seem to be with the clients.
 
Extract from Status Code manual:
 
NetBackup status code 2001
Message: No drives are available for this job
Explanation: A job requested a tape drive, but no eligible drive path was configured for the job.
Recommended Action: Try the following:
Verify that the required drives and robots are configured and up.
■ Verify that ltid is active and a drive path exists that is configured on the drive
for the media server that the storage unit requires.
■ If the job requires an NDMP drive path, verify that one exists.

 

Please show us ALL text in the Details tab of failed job.

Were there other errors before the status 2001? Status 84 perhaps?

Have you checked Device Monitor to see if drives are UP?

Which OS on Media Server?

 

View solution in original post

4 Replies
Highlighted
Accepted Solution!

  Problem does not seem to be

 

Problem does not seem to be with the clients.
 
Extract from Status Code manual:
 
NetBackup status code 2001
Message: No drives are available for this job
Explanation: A job requested a tape drive, but no eligible drive path was configured for the job.
Recommended Action: Try the following:
Verify that the required drives and robots are configured and up.
■ Verify that ltid is active and a drive path exists that is configured on the drive
for the media server that the storage unit requires.
■ If the job requires an NDMP drive path, verify that one exists.

 

Please show us ALL text in the Details tab of failed job.

Were there other errors before the status 2001? Status 84 perhaps?

Have you checked Device Monitor to see if drives are UP?

Which OS on Media Server?

 

View solution in original post

Highlighted

Can anyone suggest me out

Can anyone suggest me out resolve issue when the backup got failed with status code 2001?

 

Highlighted

Thanks for the rply. I have

Thanks for the rply. I have check from Team. There patch activity was running on that time due to that server restarted. I think due to this problem occur. Anyway thanks for reply.

Highlighted

Your mention comment is

Your mention comment is really helpful. Thanks once again

Extract from Status Code manual:
 
NetBackup status code 2001
Message: No drives are available for this job
Explanation: A job requested a tape drive, but no eligible drive path was configured for the job.
Recommended Action: Try the following:
Verify that the required drives and robots are configured and up.
■ Verify that ltid is active and a drive path exists that is configured on the drive
for the media server that the storage unit requires.
■ If the job requires an NDMP drive path, verify that one exists.