04-16-2017 06:24 AM
NBU 7.7.3
on step 1a of this TN i tried it on my master/media server and gave me the error:
kernel is unknown or not supported, exiting.
do i need to recompile the kernel or is there a certain list of linux kernels this SAN configuration supports?
Solved! Go to Solution.
04-16-2017 11:21 PM
Hello,
May be below article help you to resolve the issue.
Article URL:http://www.veritas.com/docs/000039441
Regards,
04-16-2017 09:48 AM - edited 04-16-2017 09:57 AM
this is the step to configure FT media server.. make sure you have gone through the compatablity guide before trying to configure it.
04-16-2017 09:55 AM
04-16-2017 11:21 PM
Hello,
May be below article help you to resolve the issue.
Article URL:http://www.veritas.com/docs/000039441
Regards,
04-16-2017 11:25 PM
hi all!
the links provided discusses preparation steps which is assuming the master/media/ft server OS is compatible. i'm looking, and have searched, why it gave me the error above when i'm running on RHEL 6.3. this HCL table says it is supported,
but why i get that error above? there must be some kernel parameters/tuning that needs to be done first but where is that document?
04-16-2017 11:32 PM
hey great! exactly what i was looking for :)
though i may need to recompile my kernel because of this "It should be noted that the first three dot separated numbers, such as 2.6.9 or 2.6.16, must match" as i have 2.6.39-200.24.1.el6uek.x86_64 while the closest module is ql2300_stub.ko.2.6.32-71.el6.x86_64.