cancel
Showing results for 
Search instead for 
Did you mean: 

media write error(84) while writting to Data Domain

Pritesh_Pisal
Level 5
Partner Accredited

Hi All,

We are facing this issue intermittently 

03/07/2015 02:26:35 - Error bpbrm(pid=73816) Unsupported storage server type (DataDomain) - disabling Client Direct    
03/07/2015 02:26:36 - Info bpbrm(pid=73816) xxx is the host to backup data from     
03/07/2015 02:26:36 - Info bpbrm(pid=73816) reading file list for client        
03/07/2015 02:26:40 - Info bpbrm(pid=73816) starting bpbkar32 on client         
03/07/2015 02:26:40 - Info bpbkar32(pid=0) Backup started           
03/07/2015 02:26:40 - Info bptm(pid=81420) start            
03/07/2015 02:26:41 - Info nbjm(pid=32468) starting backup job (jobid=3907311) for client xxxx, policy yyy-xxx, schedule DIFF_INCR  
03/07/2015 02:26:41 - estimated 0 Kbytes needed
03/07/2015 02:26:41 - Info nbjm(pid=32468) started backup (backupid=xxx_1435886801) job for client xxx, policy yyy-xxx, schedule DIFF_INCR on storage unit zzzz-STU1
03/07/2015 02:26:41 - Info bptm(pid=81420) using 262144 data buffer size        
03/07/2015 02:26:41 - Info bptm(pid=81420) setting receive network buffer to 131072 bytes      
03/07/2015 02:26:41 - Info bptm(pid=81420) using 64 data buffers         
03/07/2015 02:26:43 - started process bpbrm (73816)
03/07/2015 02:26:44 - Info bptm(pid=81420) start backup           
03/07/2015 02:26:45 - Info bptm(pid=81420) backup child process is pid 79656.39064       
03/07/2015 02:26:45 - Info bptm(pid=79656) start            
03/07/2015 02:26:47 - connecting
03/07/2015 02:26:50 - connected; connect time: 0:00:03
03/07/2015 02:26:54 - begin writing
03/07/2015 10:21:52 - Critical bptm(pid=81420) image write failed: error 2060046: plugin error      
03/07/2015 10:21:52 - Critical bptm(pid=81420) sts_get_image_prop failed: error 2060046: plugin error       
03/07/2015 10:21:58 - Error bptm(pid=81420) cannot write image to disk, Invalid argument      
03/07/2015 10:21:59 - Info bptm(pid=81420) EXITING with status 84 <----------        
03/07/2015 10:22:04 - Info bpbkar32(pid=0) done. status: 84: media write error       
03/07/2015 10:22:15 - end writing; write time: 7:55:21
media write error(84)

Netbackup Version: 7.6.0.2

DD OS: 5.4.4.2
DDBoost plugin Version: 3.0.0.1-430231

anyone has faced simlier issue? 

 

1 ACCEPTED SOLUTION

Accepted Solutions

Nicolai
Moderator
Moderator
Partner    VIP   

We have previous with success opened support cases with EMC regarding plug-in errors. 

View solution in original post

11 REPLIES 11

Jaime_Vazquez
Level 6
Employee

The error message with the root cause shows:

03/07/2015 10:21:52 - Critical bptm(pid=81420) image write failed: error 2060046: plugin error      
03/07/2015 10:21:52 - Critical bptm(pid=81420) sts_get_image_prop failed: error 2060046: plugin error      

Upgade to 7.6.0.4 and try again., If that still fails open a support call.

Check the NBU 7,6 HCL for the DD device.

Nicolai
Moderator
Moderator
Partner    VIP   

I am wondering abou this one: Unsupported storage server type (DataDomain) - disabling Client Direct    

Is this VMware backup ?

Pritesh_Pisal
Level 5
Partner Accredited

HI Jamie,

I am getting this error for 2 to 3 servers other backups are working fine.

 

Hi Nicolai,

this is MS-Windows policy.

Following behavior i have observed:-

Mostly it fails while backing up the shadow Copy Components:\

Manual backup gets partially successful

we tried rebooting the server but still the same error. 

Nicolai
Moderator
Moderator
Partner    VIP   

We have previous with success opened support cases with EMC regarding plug-in errors. 

Born2rise
Level 4

Check is there any failed disk on DD?

Try to run the backup with media server side deduplication if it is running with client side deduplication.If it resolve the issue, there may a chance that there is connectivity broken due to some necessary ports are not opened for client side deduplication or necessary entries not exist in host file.

Marianne
Moderator
Moderator
Partner    VIP    Accredited Certified

I agree with Nicolai - plugin errors should be logged with EMC.

Pritesh_Pisal
Level 5
Partner Accredited

I am still working on this. due to some issue we have move this backup on tape but I will update the status of this error as soon as I can.

 

David_Bowlby
Level 4

Had a similar issue with my two data domains. my issue was resolved by limiting the maximum I/O streams on the Disk Pools for the data domains.  the version of DD i use only recommends 85 I/O Streams.  I run at 70 and the 84 codes went away.   

areznik
Level 5

+1 - had same issue, with same resolution

Was told that some backups actually use 2 or more DD IO streams, not sure how true that is

Stephen_Lindo
Level 4

I've had to do the same thing.  I have a DD990 so I can run up to 150 at a time with no issues.  Also make sure your disk pools and storage are not in a DOWN state.

Stephen_Lindo
Level 4

I've had to do the same thing.  I have a DD990 so I can run up to 150 at a time with no issues.  Also make sure your disk pools and storage are not in a DOWN state.