cancel
Showing results for 
Search instead for 
Did you mean: 

"Manual AIR" (cmd-line) from BYO MSDP to Flex MSDP... anyone?

EvenHornfelt
Level 4

AIR between 9.1.0.1 BYO mediaserver attached to Flex primaryserver -> FlexAppliance 2.1.3/NBU 9.1.0.1.  Trying to "initiate manual" AIR, as Article.100009391, Status 174, 191. Detailed: Target sts server xxxxx does not have an lsu that could be a replication target. - Backup SLP and Import SLPs using same MSDP's runs ok during scheduled backup.  

1 ACCEPTED SOLUTION

Accepted Solutions

Working! - the storage server names are case sensitive, of course. (TargetName.no) 

View solution in original post

3 REPLIES 3

StefanosM
Level 6
Partner    VIP    Accredited Certified

Had you configured the Air properly?
Had you config a regular AIR (SLP) and test it?

On the flex, you use worm storage or just deduplication on the media server.

EvenHornfelt
Level 4

Not worm, "Backup SLP and Import SLPs using same MSDP's runs ok during scheduled backup" ...

This is working fine in LAB, on Virtual FlexAppliance (2.1) NBU 9.1.0.1, Not between 2x phys... support.

Working! - the storage server names are case sensitive, of course. (TargetName.no)