08-27-2013 11:37 AM
Hello,
We have dell powervolte 4000 with net backup to save.
One of the drives was broken but the second work, when we tried to replace the broken drive the booth of them stopped working.
Question: “is there a way to do an inventory for drive or another solution to install the drives”.
Solved! Go to Solution.
08-27-2013 12:17 PM
Server OS?
NetBackup version?
http://www.symantec.com/business/support/index?page=content&id=TECH34296
When a tape drive is replaced, the Veritas NetBackup (tmp) configuration will need to be updated to reflect the changed drive...
(review the technote via the link)
08-27-2013 12:17 PM
Server OS?
NetBackup version?
http://www.symantec.com/business/support/index?page=content&id=TECH34296
When a tape drive is replaced, the Veritas NetBackup (tmp) configuration will need to be updated to reflect the changed drive...
(review the technote via the link)
08-28-2013 02:27 AM
the OS is windows serveur 2008 R2 and the NetBackup is 7.5
Now the drive are ok but when we start a save it do not work it give the message in the picture below.
Question: “the media are all in the robot where is the problem “.
08-28-2013 02:58 AM
Your storage unit is set as type hcart - make sure your drives are also hcart and so are the tapes.
At the moment 96 is due to no tapes being available - this is possibly due to a mismatch in the "type" between the storage unit, drives and/or tapes. OR it could simply be you have no tapes available.