03-15-2012 10:41 PM
11:27:54.294 [31432] <16> bptestbpcd main: Function ConnectToBPCD(rocky23) failed: 25
<2>bptestbpcd: cannot connect on socket
11:27:54.294 [31432] <2> bptestbpcd: cannot connect on socket
<2>bptestbpcd: EXIT status = 25
Solved! Go to Solution.
03-16-2012 12:12 AM
It means the host that you ran bptestbpcd FROM could not connect to the client or server destination.
Set-up bpcd logs on the destination server and see if a connection ever arrives, if not check firewall settings
03-16-2012 12:12 AM
It means the host that you ran bptestbpcd FROM could not connect to the client or server destination.
Set-up bpcd logs on the destination server and see if a connection ever arrives, if not check firewall settings
03-16-2012 12:21 AM
It means that the server that you are running bpptestbpcd on is unable to make a socket connection to the client. Usually due to a service not running, firewall or network issue.
Martin
03-16-2012 01:34 AM
Try this link:
http://www.lmgtfy.com/?q=site%3Asymantec.com+netbackup+status+25+bptestbpcd
03-16-2012 02:46 AM
Marianne, very good
03-16-2012 03:05 AM
LoL
03-16-2012 12:32 PM
Dude spare some time and read the documentations and admin guides.In short get familiar with the basics.
03-16-2012 12:41 PM
03-17-2012 01:36 AM
Hi All,
I would like to develep indepth skills in drives, library checks and log analysing skills in netbackup. As im doing remote support alot of restrictions and dont have much indepth troubleshooting knowledge. I know some basic steps to check the drives in acls(q dr), mount/Dis mount in medias, how do i go for on it..
Please guide me how do i start to learn indepth....