11-11-2013 12:30 PM
How to change opscenter port # from port 8443 to port 80? No other services using 80.
11-11-2013 01:30 PM
To know the HTTP and HTTPS port that OpsCenter uses, run the configurePorts utility.
Run the following command on Windows:
INSTALL_PATH\OpsCenter\gui\bin\goodies\configurePorts.cmd -status
Run the following command on UNIX:
/opt/SYMCOpsCenterGUI/bin/goodies/configurePorts.sh -status
configurePorts – This script is used to configure Web server ports on UNIX or Linux systems.
configurePorts.sh [-status]|[-httpPort <httpPort>][-httpsPort <httpsPort>][-shutdownPort <shutdownPort>]
though not specified I presume similar for Windows
configurePorts.cmd [-status]|[-httpPort <httpPort>][-httpsPort <httpsPort>][-shutdownPort <shutdownPort>]
11-12-2013 06:40 AM
Thanks for that. I was able to change the port # as described.
Still having an issue, here is my problem.
I am moving Opscenter onto another server.
Currently I can type in the IP address of that server and the opscenter page will come right up. <ipaddress> then opscenter comes right up.
On the new server where I have opscenter I have to type https://<servername>:443/opscenter/ in order for it to come up.
What do I need to configure in order for this to bring me right to opscenter when I type in the IP address only?
Thanks again
11-12-2013 10:47 AM
did you try configurePorts -httpsPort 443 on the new server?
03-08-2014 07:47 AM
It sounds like port 80 is not open to the machine correctly. Just the ip addr alone signifies port 80 which then in turn should redirect to port 443.
02-08-2017 02:26 AM
to chabge the ports on window sever on which opscenter is insalled. use the following command.
C:\Program Files\Symantec\OpsCenter\gui\bin\goodies>configurePorts.cmd -httpPort 70
C:\Program Files\Symantec\OpsCenter\gui\bin\goodies>configurePorts.cmd -httpsPort 70