cancel
Showing results for 
Search instead for 
Did you mean: 

Modification in nom_trapd.conf

bharatgangawane
Level 5

Hi Team ,

Can we modify the nom_trapd.conf file as per our requirement.

Need a Job Schedule in SNMP trap.

Thanks in Advance,

Bharat

4 REPLIES 4

Deeps
Level 6

Hi doubt this can be done .The SNMP trap that Opscenter sent , contains 2 standard object identifiers and 12 OpsCenter-specific object identifiers. One of the identifier (1.3.6.1.4.1.1302.3.12.10.1.3) defines the alert descripton .The values for this dscription are fetched from the Alerts configured in Opscenter .For an example an Alert for Job FInalized will conftain the following fields :

Alert Raised on: September 9, 2009 4:54 PM
Job: 26356
Tree Type : Policy
Nodes : node1
Job Policy: sample_policy
Exit Status: 150 (termination requested by administrator)
Client: ccs-win-qe-5
New State: Done
Alert Policy: Job Finalized
OpsCenter Server: ccs-sol-qe-11
Severity: Warning

This does not contain name of schedule, however , if it is very vital you may copnfigure a seprate Alert for specific Schedules and track alerts from those alert policies .

Thanks

DeepS

Thanks Deeps for revert , yes all the alert description and object identifier all are in "nom_trapd.conf" file.

Have checked all the object identifire but would't found any identifire for Name Schedule, 

Want Name Schedule in Job finalized alert descreiption.

Is that psooible to modify the conf file , so that we can fetch the trap.

Bharat

Bharat , As described there is no identifier for Policy Schedule so there is no scope in nom_trapd.conf to accomodate this.You may look into other workaround / alternates to achieve your objective.

DeepS

santhosh
Level 0
Certified

1.3.6.1.4.1.1302.3.12.10.1.5

This field is blank and not used.

1.3.6.1.4.1.1302.3.12.10.1.6

This field is blank and not used.

1.3.6.1.4.1.1302.3.12.10.1.8

This field is blank and not used.

1.3.6.1.4.1.1302.3.12.10.1.9

This field is blank and not used.

1.3.6.1.4.1.1302.3.12.10.1.10

This field is blank and not used.

 

As per the Opscenter admin guide, the above OID's are blank, cant this be customized to specific requirement, creating new alerting policy and modifying the VERITAS-COMMAND-CENTRAL-MIB and nom_trapd.conf