06-12-2010 11:19 PM
Solved! Go to Solution.
09-21-2010 03:03 PM
If you are experiencing this issue you will see events in the system event log. The command eventually succeeds but is waiting for the rlink to disconnect (hence the "workaround" of disconnecting the network).
"Some time" (the incident shows 30 mins) after trying the command you will see vxio events in the system event log to say the RLINK was disconnected.
such as:
WARNING Event 99 vxio <server> RLINK <your_rlink_name> disconnected from remote
and also at this time to this will be a retry
such as:
WARNING Event 134 vxio <server> Disconnecting RLINK <your_rlink_name> as retry count exceeded 200
If you can wait to see if these messsages appear, then you are hitting this known issue. If you are not, or you get a failure message after 1-2 mins, then you have a different issue.
I can't see where this issue hangs the server as above, I'd suspect that is not this issue.
This issue would apply to any VVR operation (eg, expand volume, pause, resume) so if you are executing from the secondary site you may hit this issue.
James.
06-13-2010 08:45 AM
06-13-2010 09:02 AM
06-14-2010 12:49 PM
06-14-2010 11:04 PM
06-23-2010 03:27 AM
06-23-2010 03:57 AM
06-23-2010 04:06 AM
06-23-2010 01:37 PM
09-20-2010 01:51 PM
Does this known issue also apply when you choose to "pause secondary from primary" when logged onto the secondary site?
Thanks - Mark
09-21-2010 03:03 PM
If you are experiencing this issue you will see events in the system event log. The command eventually succeeds but is waiting for the rlink to disconnect (hence the "workaround" of disconnecting the network).
"Some time" (the incident shows 30 mins) after trying the command you will see vxio events in the system event log to say the RLINK was disconnected.
such as:
WARNING Event 99 vxio <server> RLINK <your_rlink_name> disconnected from remote
and also at this time to this will be a retry
such as:
WARNING Event 134 vxio <server> Disconnecting RLINK <your_rlink_name> as retry count exceeded 200
If you can wait to see if these messsages appear, then you are hitting this known issue. If you are not, or you get a failure message after 1-2 mins, then you have a different issue.
I can't see where this issue hangs the server as above, I'd suspect that is not this issue.
This issue would apply to any VVR operation (eg, expand volume, pause, resume) so if you are executing from the secondary site you may hit this issue.
James.