Windows File System mount issue

[mokkan]

Hello,

I have configured the FS in Windows Server, all the sudden it is not mounting.  I can imprt the VG, but volume is not getting mounted.

What is the correct to log file to check the issue?

[RiaanBadenhorst]

MountV log

[Wally_Heim]

Hi Mokkan,

Riaan is correct in that you should check the MountV_A.txt log that is located in %vcs_home%\log folder.

If you need asisstance with this process, please open a case with Symantec Technical Support.  We are available 24x7x365 to assist with this type of issue.

Thank you,

Wally

[Marianne]

There is nothing in your opening post that says this FS is a cluster resource?

If this is a cluster resource, please post the Service Group config in main.cf as well as engine_A and MountV_A logs.

If this is not a cluster resource, tell us more about config.... 
Can you verify that disk/lun is present at OS level at boot time?
Anything in Event Viewer and/or Application logs?

[RiaanBadenhorst]

Sometimes I don't pay attention to the forum I'm looking at :p

[mokkan]

Thank you guys. We did the FC(flash copy) hardware copy using IBM storage and some how it was holding the old info. After rebooted the server I was about to mount the FS.

Thank you for all the helps guys.