12-14-2011 09:07 AM
We cannot rely on the GUI of VSF so i created a script to look for :
To check is SCCI3 is enabled.
reg query "HKLM\SYSTEM\CurrentControlSet\services\vemcsymm\Parameters" /v SupportSCSI3 | find "REG_DWORD"
or
reg query "HKLM\SYSTEM\CurrentControlSet\services\vhdsaa\parameters" /v SupportSCSI3 | find "REG_DWORD"
To check Failover (A/A or A/P) i use:
vxdmpadm dsminfo
Harddisk1 VHDSAA HITACHI OPEN-V 50 0CFE8 Fail Over Only (Active/Passive)
or
vxdmpadm arrayinfo
Harddisk1 HITACHI OPEN-V 50 0CFE8 4 Fail Over Only (Active/Passive)
But is there a way to get by CLI the Array TYPE
Because i wish to get that information when running a .bat scipt, otherwise i have to use the GUI of Veritas Enterprise Adeministrator to look if:
HITACHI OPEN-V 50 0CF9F and look under : Array Type; Active/Active
Can we find this in the Registry ?
Solved! Go to Solution.
12-15-2011 11:37 AM
Hi
The "vxdmpadm dsminfo" output provides this output. You just need to translate the DSM being used to the array family that uses it.
Here is what the two DSMs that you mention relate to.
VHDSAA = Hitachi Array family DSM is being used.
and
VEMCSYMM = EMC Symmetric family DSM is being used.
Thanks,
Wally
12-15-2011 11:37 AM
Hi
The "vxdmpadm dsminfo" output provides this output. You just need to translate the DSM being used to the array family that uses it.
Here is what the two DSMs that you mention relate to.
VHDSAA = Hitachi Array family DSM is being used.
and
VEMCSYMM = EMC Symmetric family DSM is being used.
Thanks,
Wally