cancel
Showing results forΒ 
Search instead forΒ 
Did you mean:Β 

Error V-1-5-6468

Zahid_Haseeb
Moderator
Moderator
Partner    VIP    Accredited

Environment

SFHA/DR = 5.1

Redhat=5.1

Disk = SAN Disk

Problem

While linux boot the following error stops the linux from boot. If we unplug the Fiber Cable and start linux the system can boot. After system boot we plugged the cable and run the command vxdisk scandisks, the system able to detect the disk and show with the the command vxdisk list. Although we have to import the DiskGroup.

Error while boot

VxVM VVR vxrecover  WARNING V-5-1-6468 datavol XXXXXX detached

 

  • All plexes are showing disabled under vxprint (KSTATE)
  • Volume is detacted
  • System got hangged and restart when run the command vxrecover -g DGname -ns OR vxrecover -g DGname -sb and vxrecover -g DIskGroupName -s VolumeName can run successful but cant put any impact.
  • I was also facing the FAILING flag on the vxprint (under state) command but off this message via the command  # vxedit -g <diskgroup> set failing=off <disk>

For your reference:

[root@XXXX003 ~]# vxprint

Disk group: XXXX-DG

 

TY NAME         ASSOC        KSTATE   LENGTH   PLOFFS   STATE    TUTIL0  PUTIL0

dg XXXX-DG       XXXX-DG       -        -        -        -        -       -

 

dm XXXX-DG01     san_vc0_0    -        213727216 -       -        -       -

dm XXXX-DG02     san_vc0_1    -        213727216 -       -        -       -

dm XXXX-DG03     san_vc0_2    -        213727216 -       -        -       -

dm XXXX-DG04     san_vc0_3    -        213727216 -       -        -       -

 

v  XXXX-LOGS     fsgen        DISABLED 251658240 -       ACTIVE   -       -

pl XXXX-LOGS-01  XXXX-LOGS     DISABLED 251658240 -       ACTIVE   -       -

sd XXXX-DG02-03  XXXX-LOGS-01  ENABLED  165309920 0       -        -       -

sd XXXX-DG03-03  XXXX-LOGS-01  ENABLED  86348320 165309920 -       -       -

 

rv XXXX-RVG      -            RECOVER  -        -        FAIL     -       -

rl rlk_192.168.4.5_XXXX-RVG XXXX-RVG RECOVER -   -        FAIL     -       -

v  XXXX-DATA     XXXX-RVG      DETACHED 262144000 -       DETACH   -       -

pl XXXX-DATA-01  XXXX-DATA     DISABLED 262144000 -       ACTIVE   -       -

sd XXXX-DG01-01  XXXX-DATA-01  ENABLED  213727216 0       -        -       -

sd XXXX-DG02-01  XXXX-DATA-01  ENABLED  48416784 213727216 -       -       -

pl XXXX-DATA-02  XXXX-DATA     DISABLED(SPARSE) LOGONLY - CLEAN    -       -

sd XXXX-DG02-02  XXXX-DATA-02  ENABLED  512      LOG      -        -       -

pl XXXX-DATA-03  XXXX-DATA     DISABLED(SPARSE) LOGONLY - ACTIVE   -       -

sd XXXX-DG03-01  XXXX-DATA-03  ENABLED  512      LOG      -        -       -

v  XXXX-DATA-SRL XXXX-RVG      DISABLED 314572800 SRL     ACTIVE   -       -

pl XXXX-DATA-SRL-01 XXXX-DATA-SRL DISABLED 314572800 -    ACTIVE   -       -

sd XXXX-DG03-02  XXXX-DATA-SRL-01 ENABLED 100845584 0     -        -       -

sd XXXX-DG04-01  XXXX-DATA-SRL-01 ENABLED 213727216 100845584 -    -       -

 

 vxvol -g XXXX-DG start XXXX-DATA
VxVM vxvol ERROR V-5-1-6415 Cannot start detached volume XXXX-DATA

 

vxrecover -g DIskGroupName -s VolumeName

(The above vxrecover command can run successful but cant put any impact on vxprint. See the below vxprint for your reference)

v  XXXX-DATA     XXXX-RVG      DETACHED 262144000 -       DETACH   -       -


















 

 

 

 

 

 

 

 

4 REPLIES 4

Zahid_Haseeb
Moderator
Moderator
Partner    VIP    Accredited

Found one thing that the /var was full. Although its a individual filesystem and should not put any influence. Anyway I made this empty. But still I am not able to start my volumes via the command vxvol -g DIskGroup VolumeName

error

cannot start detached volume

s-for-storage
Not applicable
Employee

Solution mentioned in this technote might help:

http://www.symantec.com/business/support/index?page=content&id=TECH181709

sdio_writer
Level 4
Employee

Hi, Zahid

SAMG Information Development will look at the information you provided and the TechNote s-for-storage referenced. We'll use this information to update the V-5-1-6468 message on the SORT web site.

I'll contact you when this work is completed.


Thanks.

 

Zahid_Haseeb
Moderator
Moderator
Partner    VIP    Accredited

Thanks all for kind replies. I re-created the DR site diskgroup and volumes.