cancel
Showing results for 
Search instead for 
Did you mean: 

Import disk group failure

aflyer88
Level 2

Hello everyone!  When I finished disk group configuration, I cannot find disk group until I imported by manual,but after rebooting server,I couldn't find the disk group only if I imported again.following are my operations.Also the RVG was DISABLED until I started it,but it's still DISABLED after rebooting.Any help and suggestion would be appreciate

 

[root@u31_host Desktop]# vxdisk list                                   
DEVICE       TYPE            DISK         GROUP        STATUS
sda          auto:none                -            -            online invalid
sdb          auto:cdsdisk            -            -            online
sdc          auto:cdsdisk            -            -            online
sdd          auto:cdsdisk            -            -            online
[root@u31_host Desktop]# vxdg list                                    
NAME         STATE           ID

[root@u31_host Desktop]# cd /dev/vx/dsk/                             
[root@u31_host dsk]# ls                                               
[root@u31_host dsk]# vxdisk -o alldgs list                            
DEVICE       TYPE            DISK         GROUP             STATUS
sda          auto:none                -            -                         online invalid
sdb          auto:cdsdisk            -            (netnumendg)    online
sdc          auto:cdsdisk            -            (netnumendg)    online
sdd          auto:cdsdisk           -             (netnumendg)    online

[root@u31_host dsk]# vxdg import netnumendg                          
[root@u31_host dsk]# vxdisk -o alldgs list                           
DEVICE       TYPE            DISK         GROUP        STATUS
sda          auto:none       -            -            online invalid
sdb          auto:cdsdisk    netnumendg01  netnumendg   online
sdc          auto:cdsdisk    netnumendg02  netnumendg   online
sdd          auto:cdsdisk    netnumendg03  netnumendg   online

[root@u31_host dsk]# vxprint -rt |grep ^rv              
rv netnumenrvg  1            DISABLED CLEAN    primary  2         srl_vol     
[root@u31_host dsk]# vxrvg -g netnumendg start netnumenrvg      
[root@u31_host dsk]# vxprint -rt |grep ^rv                      
rv netnumenrvg  1            ENABLED  ACTIVE   primary  2         srl_vol


After reboot the server


[root@u31_host Desktop]# vxprint                                    
[root@u31_host Desktop]# vxdg list                                  
NAME         STATE           ID

[root@u31_host Desktop]# vxdisk list                                
DEVICE       TYPE            DISK         GROUP        STATUS
sda          auto:none       -            -            online invalid
sdb          auto:cdsdisk    -            -            online
sdc          auto:cdsdisk    -            -            online
sdd          auto:cdsdisk    -            -            online

[root@u31_host Desktop]# vxprint -rt |grep ^rv                    
[root@u31_host Desktop]# cd /dev/vx/dsk/                          
[root@u31_host dsk]# ls
[root@u31_host dsk]# vxdisk -o alldgs list                          
DEVICE       TYPE            DISK         GROUP        STATUS
sda          auto:none       -            -            online invalid
sdb          auto:cdsdisk    -            (netnumendg) online
sdc          auto:cdsdisk    -            (netnumendg) online
sdd          auto:cdsdisk    -            (netnumendg) online

1 ACCEPTED SOLUTION

Accepted Solutions

mikebounds
Level 6
Partner Accredited

 

If you also have VCS on the system, then VCS will change the noautoimport to on, so that that it doesn't import - you can check this by:

vxprint -mg cvm-dg  | grep autoimport

To enable the RVG run:

vxrvg -g netnumendg start netnumenrvg

Mike

View solution in original post

1 REPLY 1

mikebounds
Level 6
Partner Accredited

 

If you also have VCS on the system, then VCS will change the noautoimport to on, so that that it doesn't import - you can check this by:

vxprint -mg cvm-dg  | grep autoimport

To enable the RVG run:

vxrvg -g netnumendg start netnumenrvg

Mike

View solution in original post